Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. The accuracy of machining can be predicted during the design process of CNC machine tools, while the prediction accuracy depends on the prediction model. However, when establishing the prediction model, the coupling effect among the machine tool's different components is always ignored for modeling efficiency, so this will lead to its reliability cannot be guaranteed. To address this problem, the model reduction theory and the lumped parameter method are used in this study to set the state-space equations of the essential structural parts. Moreover, the electro-mechanical coupling parameter equation of the servo system is transformed into a state-space equation. Then the state-space equations of the components and the servo system are coupled to establish the machine tool dynamic model. Furthermore, a theoretical model of instantaneous undeformed chip thickness is found, and according to the linear relationship between the micro-cutting force and the instantaneous undeformed chip thickness, the instantaneous cutting force model of the cylindrical milling cutter is established. Based on these, the integrated model, which considers the mechanical structure, control system and cutting force, is obtained and further used in Simulink to build the machining accuracy prediction platform, as well as the accuracy of the integrated prediction model is verified. Moreover, the prediction model established by the integrated modeling method can effectively simulate the actual machining conditions of the machine tool, and the superiority of prediction is confirmed by comparing the simulated and measured results in peripheral milling applications. The results show the error in the system response efficiency is 14.8%, while the error in position accuracy and delay characteristics is less than 10%, the error between the predicted size of the prediction model and the actual size is within 28 μm, a minimum prediction error is 7 μm.

Influence of Tool Assembly Error on Machined Surface in Peripheral Milling Process

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

An Error Prediction Model of NC Machining Process Considering Multiple Error Sources

Influence of Tool Rotation Errors on Flank Machined Surface

The Finite Element Analysis Of Serrated Chip Formation In High-Speed Cuffing Auto Panel Dies

Effect of Tool Rotation Erroron the Topography of Flank Machined Surface

Effects of Geometric and Spindle Errors on the Quality of End Turning Surface

Machined surface prediction and reliability analysis in peripheral milling operations

Study on Analytical Model of Surface Roughness Prediction in NC Machining

Model for Surface Topography Prediction in Cylinder Turning

An Integrated Model Based Prediction of Machining Accuracy for Milling Machine

A surface quality prediction model considering the machine-tool-material interactions

3D bevel surface topography analysis and roughness prediction by considering the cutter-workpiece dynamic interaction

Prediction of machining accuracy based on geometric error estimation of tool rotation profile in five-axis multi-layer flank milling process

Geometry Simulation and Evaluation of the Surface Topography in Five-Axis Ball-End Milling

Modelling of End Milling Surface Error with Considering Tool-Machine-workpiece Compliance

Influence and prediction of tool wear on workpiece surface roughness based on milling topography analysis

Model for the prediction of 3D surface topography and surface roughness in micro-milling Inconel 718

Modeling and simulation of surface topography in five-axis ball end milling

Reliability analysis of micro milling accuracy based on flexible force model

Multi-scale prediction of the geometrical deviations of the surface finished by five-axis ball-end milling