Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. The accuracy of machining can be predicted during the design process of CNC machine tools, while the prediction accuracy depends on the prediction model. However, when establishing the prediction model, the coupling effect among the machine tool's different components is always ignored for modeling efficiency, so this will lead to its reliability cannot be guaranteed. To address this problem, the model reduction theory and the lumped parameter method are used in this study to set the state-space equations of the essential structural parts. Moreover, the electro-mechanical coupling parameter equation of the servo system is transformed into a state-space equation. Then the state-space equations of the components and the servo system are coupled to establish the machine tool dynamic model. Furthermore, a theoretical model of instantaneous undeformed chip thickness is found, and according to the linear relationship between the micro-cutting force and the instantaneous undeformed chip thickness, the instantaneous cutting force model of the cylindrical milling cutter is established. Based on these, the integrated model, which considers the mechanical structure, control system and cutting force, is obtained and further used in Simulink to build the machining accuracy prediction platform, as well as the accuracy of the integrated prediction model is verified. Moreover, the prediction model established by the integrated modeling method can effectively simulate the actual machining conditions of the machine tool, and the superiority of prediction is confirmed by comparing the simulated and measured results in peripheral milling applications. The results show the error in the system response efficiency is 14.8%, while the error in position accuracy and delay characteristics is less than 10%, the error between the predicted size of the prediction model and the actual size is within 28 μm, a minimum prediction error is 7 μm.

Machined surface prediction and reliability analysis in peripheral milling operations

An Intelligent Prediction of Surface Roughness on Precision Grinding

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

Influence of Tool Assembly Error on Machined Surface in Peripheral Milling Process

Support Vector Machines-Based Method for Machining Error Prediction Modeling

Study on Analytical Model of Surface Roughness Prediction in NC Machining

An Error Prediction Model of NC Machining Process Considering Multiple Error Sources

A surface quality prediction model considering the machine-tool-material interactions

An Integrated Model Based Prediction of Machining Accuracy for Milling Machine

Precision Prediction of Surface Roughness in High Speed Peripheral Milling Ti6Al4V Alloy

3D bevel surface topography analysis and roughness prediction by considering the cutter-workpiece dynamic interaction

Surface topography prediction in peripheral milling of thin-walled parts considering cutting vibration and material removal effect

Multi-scale prediction of the geometrical deviations of the surface finished by five-axis ball-end milling

Model for Surface Topography Prediction in Cylinder Turning

The prediction of 3D surface topography in a high-speed micro-milling process with aerostatic spindle

Milling Stability Prediction for Flexible Workpiece Using Dynamics of Coupled Machining System

An integrated machine-process-controller model to predict milling surface topography considering vibration suppression

Modelling and prediction of surface topography on machined slot side wall with single-pass end milling

Model for the prediction of 3D surface topography and surface roughness in micro-milling Inconel 718

Reliability sensitivity analysis of ball-end milling accuracy

Influence and prediction of tool wear on workpiece surface roughness based on milling topography analysis