Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. The accuracy of machining can be predicted during the design process of CNC machine tools, while the prediction accuracy depends on the prediction model. However, when establishing the prediction model, the coupling effect among the machine tool's different components is always ignored for modeling efficiency, so this will lead to its reliability cannot be guaranteed. To address this problem, the model reduction theory and the lumped parameter method are used in this study to set the state-space equations of the essential structural parts. Moreover, the electro-mechanical coupling parameter equation of the servo system is transformed into a state-space equation. Then the state-space equations of the components and the servo system are coupled to establish the machine tool dynamic model. Furthermore, a theoretical model of instantaneous undeformed chip thickness is found, and according to the linear relationship between the micro-cutting force and the instantaneous undeformed chip thickness, the instantaneous cutting force model of the cylindrical milling cutter is established. Based on these, the integrated model, which considers the mechanical structure, control system and cutting force, is obtained and further used in Simulink to build the machining accuracy prediction platform, as well as the accuracy of the integrated prediction model is verified. Moreover, the prediction model established by the integrated modeling method can effectively simulate the actual machining conditions of the machine tool, and the superiority of prediction is confirmed by comparing the simulated and measured results in peripheral milling applications. The results show the error in the system response efficiency is 14.8%, while the error in position accuracy and delay characteristics is less than 10%, the error between the predicted size of the prediction model and the actual size is within 28 μm, a minimum prediction error is 7 μm.

Support Vector Machines-Based Method for Machining Error Prediction Modeling

Volumetric Error Prediction and Compensation of NC Machine Tool Based on Least Square Support Vector Machine

Synthetic Error Modeling for NC Machine Tools Based on Intelligent Technology

An Efficient Error Compensation Method for Coordinated CNC Five-Axis Machine Tools

An Error Prediction Model of NC Machining Process Considering Multiple Error Sources

Support Vector Machine and Neural Network United System for NC Machine Tool Thermal Error Modeling

Identification and Compensation for Volumetric Errors of CNC Machine Tools Based on SVM

Thermal error modeling and forecasting for NC machine tools based on intelligent technology

Research on Position Accuracy Forecasting Model of CO_2 Laser Micromachining Table

Thermal Error Prediction of Numerical Control Machine Tools Based on Least Squares Support Vector Machines

An Integrated Model Based Prediction of Machining Accuracy for Milling Machine

A Hybrid-Model-Based CNC Machining Trajectory Error Prediction and Compensation Methtyleod

Volumetric Error Modeling And Analysis For Cnc Machine Tool Based On Multi-Body System

Modeling of CNC Machine Tool Thermal Errors Based on LS-SVM within Bayesian Evidence Framework

Thermal Error Modeling and Compensation of Spindles Based on LS-SVM

Modeling and compensation of comprehensive errors for thin-walled parts machining based on on-machine measurement

F Test-Based Automatic Modeling of Single Geometric Error Component for Error Compensation of Five-Axis Machine Tools

Machining accuracy prediction and adaptive compensation method of CNC machine tool under absence of machining process sensing

An efficient error compensation system for CNC multi-axis machines

Error Prediction And Compensation Of Azimuth Based On Support Vector Machine

A systematic spatial-variably volumetric error model and machining optimization method based on continuous moving support variation of machine tool