Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. The accuracy of machining can be predicted during the design process of CNC machine tools, while the prediction accuracy depends on the prediction model. However, when establishing the prediction model, the coupling effect among the machine tool's different components is always ignored for modeling efficiency, so this will lead to its reliability cannot be guaranteed. To address this problem, the model reduction theory and the lumped parameter method are used in this study to set the state-space equations of the essential structural parts. Moreover, the electro-mechanical coupling parameter equation of the servo system is transformed into a state-space equation. Then the state-space equations of the components and the servo system are coupled to establish the machine tool dynamic model. Furthermore, a theoretical model of instantaneous undeformed chip thickness is found, and according to the linear relationship between the micro-cutting force and the instantaneous undeformed chip thickness, the instantaneous cutting force model of the cylindrical milling cutter is established. Based on these, the integrated model, which considers the mechanical structure, control system and cutting force, is obtained and further used in Simulink to build the machining accuracy prediction platform, as well as the accuracy of the integrated prediction model is verified. Moreover, the prediction model established by the integrated modeling method can effectively simulate the actual machining conditions of the machine tool, and the superiority of prediction is confirmed by comparing the simulated and measured results in peripheral milling applications. The results show the error in the system response efficiency is 14.8%, while the error in position accuracy and delay characteristics is less than 10%, the error between the predicted size of the prediction model and the actual size is within 28 μm, a minimum prediction error is 7 μm.

Reliability analysis of micro milling accuracy based on flexible force model

Reliability sensitivity analysis of ball-end milling accuracy

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

Finite Element Simulation and Analysis of Deformation in Machining of Aeronautical Aluminum Alloy Thin-Walled Workpiece

Numerical Simulation Study on Milling Force for Aerospace Aluminum Alloy

Key Technologies of Physics-Based Milling Process Simulation

Investigation on dynamic tool deflection and runout-dependent analysis of the micro-milling process

Influence of Tool Assembly Error on Machined Surface in Peripheral Milling Process

Online monitoring model of micro-milling force incorporating tool wear prediction process

Micro-milling force modeling with tool wear and runout effect by spatial analytic geometry

Investigation of the tool flank wear influence on cutter-workpiece engagement and cutting force in micro milling processes

Generic Cutting Force Modeling Comprehensively Considering Tool Edge Radius, Tool Flank Wear and Tool Runout in Micro-End Milling

Modeling of cutting force in micro-milling considering asymmetric tool wear

An Integrated Model Based Prediction of Machining Accuracy for Milling Machine

Prediction of micro milling force and surface roughness considering size-dependent vibration of micro-end mill

Micro milling force prediction of arc thin-walled parts considering dual flexibility coupling deformation

Predictive Model of Milling Force for Complex Profile Milling

Micro-Milling Tool Wear Monitoring via Nonlinear Cutting Force Model

Dynamic Modeling for Chatter Analysis in Micro-Milling by Integrating Effects of Centrifugal Force, Gyroscopic Moment, and Tool Runout

An improved time-varying stability analysis of micro milling considering tool wear

Analytical modeling of milling residual stress under different tool wear conditions