Abstract:The prediction of micro milling forces in difficult-to-machine materials such as titanium alloys, which have small dimensions and arc-thin-walled features, has become a major challenge due to coupling effects of multi-physics fields. This problem has become a key bottleneck in the development of aerospace, biomedical, and other fields. This study focuses on titanium alloy arc-thin-walled parts and develops a micro milling force prediction model that considers the dual flexible coupling deformation and geometric features of arc-thin-walled parts in the process of micro milling. Firstly, a micro milling force theoretical model is established based on the instantaneous cutter position angle and instantaneous uncut chip thickness. Secondly, the detailed geometric analysis is conducted to calculate the entry and exit angles and instantaneous uncut chip thickness considering the micro milling path characteristics. Subsequently, the Euler beam and Timoshenko beam are assumed based on the characteristics of the cutter and workpiece structure, as well as the force situations. The deflection deformation values are calculated by solving unit stiffness matrix. The coupling deflection deformation is introduced into the micro milling force prediction model by an iterative algorithm, and this improves the instantaneous uncut chip thickness model. Finally, the micro milling force data is obtained through arc micro milling experiments, and the coefficient of micro milling force is identified. The reliability and accuracy of the micro milling force prediction model are verified through experiments, of which the prediction error range is 9.005~12.427%. The proposed model and methodology have practical significance and provide a basis for optimizing micro milling processes and promoting the development of related fields.

Modeling of cutting force in micro-milling considering asymmetric tool wear

Micro-Milling Tool Wear Monitoring via Nonlinear Cutting Force Model

Generic Cutting Force Modeling Comprehensively Considering Tool Edge Radius, Tool Flank Wear and Tool Runout in Micro-End Milling

Investigation of the tool flank wear influence on cutter-workpiece engagement and cutting force in micro milling processes

Influence of tool flank wear considering tool edge radius on instantaneous uncut chip thickness and cutting force in micro-end milling

Micro-milling force modeling with tool wear and runout effect by spatial analytic geometry

Numerical Simulation Study on Milling Force for Aerospace Aluminum Alloy

Molecular Dynamics Simulation of Micro Cutting Process of Abrasive Wear

Prediction of Nonlinear Micro-Milling Force with a Novel Minimum Uncut Chip Thickness Model

An analytical micro-milling force model based on the specific cutting pressure-feed dependence, in presence of ploughing and tool run-out effects

An analytical approach to cutting force prediction in milling of carbon fiber reinforced polymer laminates

Online monitoring model of micro-milling force incorporating tool wear prediction process

Tool Run-Out in Micro-Milling: Development of an Analytical Model Based on Cutting Force Signal Analysis

Micro-milling tool wear monitoring under variable cutting parameters and runout using fast cutting force coefficient identification method

Reliability analysis of micro milling accuracy based on flexible force model

Modeling of cutting forces in 1-D and 2-D ultrasonic vibration-assisted milling of Ti-6Al-4V

Predictive Model of Milling Force for Complex Profile Milling

A Cutting Force Model Based on Compensated Chip Thickness in Five-Axis Flank Milling

Prediction of Cutting Forces in Flank Milling of Parts with Non-Developable Ruled Surfaces

Enhanced modeling of instantaneous uncut chip thickness and cutter workpiece engagement region in 5 axis ball end milling: Case of the tilt orientation

Micro milling force prediction of arc thin-walled parts considering dual flexibility coupling deformation