Abstract:Tool path generation is an important task in end milling. In the existing literature, the tool path pattern/style is determined based on geometric analysis. However, there is little analysis from the viewpoint of machining dynamics/cutting force, which is more related to the final manufacturing performance. Although there are many types of tool paths (e.g., zigzag, spiral, and ISO-scallop tool path), they can be decomposed into a number of circular tool paths with various path radii and cutting angles. Firstly, by investigating chip formation mechanism, the effect of tool path radius on uncut chip thickness is obtained. Analysis shows that tool path radius has a significant influence on uncut chip thickness, thus affecting the cutting force, especially when the tool path radius is small. Then, the effect of cutting angle on cutting force distribution is analyzed. It is found that the feed direction could vary the distribution of cutting force in <em class="EmphasisTypeItalic">X</em> and <em class="EmphasisTypeItalic">Y</em> direction in 3-axis end milling. Based on such analysis, the cutting force prediction model considering tool path effect is established. To validate the proposed model, various experiments have been carried out based on well-designed tool paths. The comparative results show that (1) tool path has great effect on cutting force through the tool path radius, rotation direction, and start/end point, and (2) the proposed model is capable of providing accurate cutting force prediction considering tool path effect. From a physical viewpoint, the proposed method provides huge potential in automated/intelligent tool path optimization towards better surface quality via minimizing cutting force, which significantly contributes to the state of the art in tool path generation.

Influence of tool flank wear considering tool edge radius on instantaneous uncut chip thickness and cutting force in micro-end milling

Investigation of the tool flank wear influence on cutter-workpiece engagement and cutting force in micro milling processes

Generic Cutting Force Modeling Comprehensively Considering Tool Edge Radius, Tool Flank Wear and Tool Runout in Micro-End Milling

Modeling of cutting force in micro-milling considering asymmetric tool wear

Effects of Tool Flank Wear on Orthogonal Cutting Process of Aluminum Alloy

A Cutting Force Model Based on Compensated Chip Thickness in Five-Axis Flank Milling

Prediction of Nonlinear Micro-Milling Force with a Novel Minimum Uncut Chip Thickness Model

An analytical approach to cutting force prediction in milling of carbon fiber reinforced polymer laminates

Micro-milling force modeling with tool wear and runout effect by spatial analytic geometry

Effect of tool path on cutting force in end milling

Enhanced modeling of instantaneous uncut chip thickness and cutter workpiece engagement region in 5 axis ball end milling: Case of the tilt orientation

Prediction of Cutting Forces in Flank Milling of Parts with Non-Developable Ruled Surfaces

An analytical micro-milling force model based on the specific cutting pressure-feed dependence, in presence of ploughing and tool run-out effects

Micro-Milling Tool Wear Monitoring via Nonlinear Cutting Force Model

Analysis and modeling of cutting force considering the tool runout effect in longitudinal-torsional ultrasonic vibration-assisted 5 axis ball end milling

Mechanism and force modeling for cross-edges in the flank-end milling process based on the constrained cutting theory

An Alternative Approach to Compute Chip Thickness in Milling

Tool wear rate prediction in ultrasonic vibration-assisted milling

On the Steady-State Workpiece Flow Mechanism and Force Prediction Considering Piled-Up Effect and Dead Metal Zone Formation

Investigation on dynamic tool deflection and runout-dependent analysis of the micro-milling process

Numerical Modeling of the Effect of Cutting-Edge Radius on Cutting Force and Stress Concentration during Machining