Abstract:Tool wear and breakage is one of the biggest obstacles for developing the unattended CNC machining. Especially when cutting the difficult-to-machining materials, the tool wear will be more rapid and the tool breakage becomes more frequent, which makes an effective tool wear and breakage monitoring very urgent. In the paper, a physical model-based tool wear and breakage monitoring method is proposed. Firstly, a physical model of milling force with the influence of cutter runout and tool wear is established. The spindle box vibration and cutting torque of spindle drive system induced by milling force have been clarified theoretically. Then, through the measurements of milling force, spindle box vibration and driving current, a tool wear monitoring method by extracting the comprehensive feature from the seven-channel specific cutting force coefficients (SCFCs) has been presented. In the method, a multi-parameter decoupling identification procedure for the cutter runout, tooth wear loss and respective SCFCs has been clarified. The force homogenization effect of multi-tooth with tool wear is found. Moreover, an efficient tool breakage monitoring method is further put forward, which incorporates the amplitude ratios of multi-channel data to form an indicator for judging the occurrence of tool damage. The generation mechanism of the sudden distortion on signal waveform resulting from tool breakage is also explained. Finally, long-time milling experiments with multiple groups of machining parameters have been carried out on the general and heavy-cutting machine tools to verify the validity of the proposed method. The verification results indicate that the tool wear and breakage monitoring method can well estimate the cutting status of cutter. The study can provide a useful research basis for the potential industrial application of tool wear and breakage monitoring technology.

Micro-Milling Tool Wear Monitoring via Nonlinear Cutting Force Model

Online monitoring model of micro-milling force incorporating tool wear prediction process

Milling force coefficients-based tool wear monitoring for variable parameter milling

Modeling of cutting force in micro-milling considering asymmetric tool wear

Micro-milling tool wear monitoring under variable cutting parameters and runout using fast cutting force coefficient identification method

Modeling of Non-Linear Cutting Forces for Dry Orbital Drilling Process Based on Undeformed Chip Geometry

Investigation of the tool flank wear influence on cutter-workpiece engagement and cutting force in micro milling processes

Generic Cutting Force Modeling Comprehensively Considering Tool Edge Radius, Tool Flank Wear and Tool Runout in Micro-End Milling

Prediction of Nonlinear Micro-Milling Force with a Novel Minimum Uncut Chip Thickness Model

Physical model-based tool wear and breakage monitoring in milling process

Tool wear monitoring through online measured cutting force and cutting temperature during face milling Inconel 718

Real-time tool wear monitoring in milling using a cutting condition independent method

Micro-milling force modeling with tool wear and runout effect by spatial analytic geometry

A generic tool wear model and its application to force modeling and wear monitoring in high speed milling

Predictive Model of Milling Force for Complex Profile Milling

Tool wear monitoring of micro-milling operations

Intelligent monitoring of milling tool wear based on milling force coefficients by prediction of instantaneous milling forces

An analytical micro-milling force model based on the specific cutting pressure-feed dependence, in presence of ploughing and tool run-out effects

Milling Tool Wear Monitoring via the Multichannel Cutting Force Coefficients

In-situ tool wear condition monitoring during the end milling process based on dynamic mode and abnormal evaluation

Tool Run-Out in Micro-Milling: Development of an Analytical Model Based on Cutting Force Signal Analysis