Abstract:Due to issues such as limited variability in monitoring data across different tool wear conditions and interference during the machining process, data-driven monitoring models are susceptible to misclassification. Therefore, this paper proposes a pioneering approach that takes into account the tool wear law and the characteristic distribution of tool wear monitoring data. Specifically, the paper proposes an automatic feature extraction and tool condition monitoring method based on Siamese Long Short-term Memory Networks (SLSTMs) to transform the original data distribution, enhance the differentiation of different tool wear condition monitoring data, and achieve accurate prediction of tool wear condition. Additionally, a hybrid data and mechanism-driven tool wear monitoring method is proposed that takes advantage of the fact that tool wear is continuous and irreversible to enable reliable adjustment of the monitoring results of the data-driven model without human intervention. The study conducted milling experiments on a three-axis vertical machining center, using TA2 titanium alloy as the workpiece material. Vibration signals from the spindle in three directions were collected as input to the network, with tool wear state labeled as “0″ or ”1″ as the output. Classical machine learning algorithms such as Decision Trees, K-Nearest Neighbors (KNN) and Support Vector Machines (SVM), as well as classical deep learning algorithms such as Convolutional Neural Networks (CNN), Sparse Stacked Autoencoders (SSAE) and Long Short-Term Memory Neural Networks (LSTM), were used to construct and compare feature extraction and state monitoring models. The proposed model based on Siamese Long Short-Term Memory Neural Networks (SLSTMs) achieved testing average accuracy of 98.2% (σ2 = 0.44), outperforming typical deep learning algorithms such as CNN, LSTM and SSAE as well as traditional machine learning algorithms such as Decision Trees, KNN and SVM in terms of accuracy and robustness. Moreover, the proposed data and mechanism hybrid-driven tool wear monitoring method can effectively improve the monitoring accuracy and robustness of data-driven models such as CNN and SSAE. The monitoring accuracy of CNN and SSAE increased from 95.9% to 97.6% and 91.0% to 94.3%, respectively.

Milling force coefficients-based tool wear monitoring for variable parameter milling

Milling Tool Wear Monitoring via the Multichannel Cutting Force Coefficients

Online monitoring model of micro-milling force incorporating tool wear prediction process

Intelligent monitoring of milling tool wear based on milling force coefficients by prediction of instantaneous milling forces

Micro-milling tool wear monitoring under variable cutting parameters and runout using fast cutting force coefficient identification method

Micro-Milling Tool Wear Monitoring via Nonlinear Cutting Force Model

Intelligent Robust Milling Tool Wear Monitoring Via Fractal Analysis of Cutting Force.

Real-time tool wear monitoring in milling using a cutting condition independent method

Multisensory based tool wear monitoring for practical applications in milling of titanium alloy

Dynamic Milling Force Model Considering Vibration and Tool Flank Wear Width for Monitoring Tool States in Machining of Ti-6AI-4V

Physical model-based tool wear and breakage monitoring in milling process

A generic tool wear model and its application to force modeling and wear monitoring in high speed milling

Milling Force Modeling of Worn Tool and Tool Flank Wear Recognition in End Milling

On-line tool wear monitoring under variable milling conditions based on a condition-adaptive hidden semi-Markov model (CAHSMM)

Unsupervised Tool Wear Monitoring in the Corner Milling of a Titanium Alloy Based on a Cutting Condition-Independent Method

High Efficiency Orientated Milling Parameter Optimization with Tool Wear Monitoring in Roughing Operation

Tool wear monitoring through online measured cutting force and cutting temperature during face milling Inconel 718

Tool wear monitoring in milling of titanium alloy Ti–6Al–4 V under MQL conditions based on a new tool wear categorization method

Tool Wear Prediction Model Based on Wear Influence Factor

Tool Wear Monitoring Strategy During Micro-Milling of TC4 Alloy Based on a Fusion Model of Recursive Feature Elimination-Bayesian Optimization-Extreme Gradient Boosting

A novel online tool condition monitoring method for milling titanium alloy with consideration of tool wear law