Abstract:This paper aims to explore the evolution of microstructural parameters induced during the cutting of Ti6Al4V alloy (TC4). The microstructure characteristics of the workpiece material is directly tied to its mechanical response during machining. During TC4 cutting, microstructure evolution is observed as a result of severe plastic deformations. The characterization of this phenomenon has significant interest from both academia and industry. In this work we present a developed modeling technique which combines the Particle Finite Element Method (PFEM) with incremental homogeneous field distributions. First, the PFEM is extended to perform a thermo-mechanical analysis capable of capturing the material responses of TC4 during orthogonal cutting. To generate serrated chips, an appropriate strain softening-based constitutive plasticity model i.e., TANH (Hyperbolic TANgent) is utilized. The PFEM's validity is checked through comparison with available experimental results in terms of chip shapes and cutting forces. Second, the evolution of microstructural parameters such as dislocation density, vacancy concentration, dynamic recrystallization (DRx) grain size, and hardness is incrementally developed and incorporated into the PFEM using internal state variables as homogeneous field distributions. The Johnson–Mehl–Avrami–Kolmogorov (JMAK) model and Hall–Petch equation are applied for predicting grain size and hardness, respectively. The parameters of the corresponding models are modified for TC4 to accurately capture their alterations. Lastly, the predicted results of the microstructure evolution in serrated chips and machined surfaces, including average grain size and hardness, are compared with experiments, demonstrating good agreement. This implies that the PFEM combined with microscale schemes can reliably simulate the machining process of the TC4.

An analytical micro-milling force model based on the specific cutting pressure-feed dependence, in presence of ploughing and tool run-out effects

Numerical Simulation Study on Milling Force for Aerospace Aluminum Alloy

Tool Run-Out in Micro-Milling: Development of an Analytical Model Based on Cutting Force Signal Analysis

Modeling of cutting force in micro-milling considering asymmetric tool wear

Generic Cutting Force Modeling Comprehensively Considering Tool Edge Radius, Tool Flank Wear and Tool Runout in Micro-End Milling

Micro-milling force modeling with tool wear and runout effect by spatial analytic geometry

Prediction of Nonlinear Micro-Milling Force with a Novel Minimum Uncut Chip Thickness Model

Modeling of cutting forces in 1-D and 2-D ultrasonic vibration-assisted milling of Ti-6Al-4V

Investigation of the tool flank wear influence on cutter-workpiece engagement and cutting force in micro milling processes

An analytical approach to cutting force prediction in milling of carbon fiber reinforced polymer laminates

Micro-Milling Tool Wear Monitoring via Nonlinear Cutting Force Model

Influence of tool flank wear considering tool edge radius on instantaneous uncut chip thickness and cutting force in micro-end milling

Micro milling force prediction of arc thin-walled parts considering dual flexibility coupling deformation

Investigation on dynamic tool deflection and runout-dependent analysis of the micro-milling process

Microstructure evolution modeling of Ti6Al4V alloy during cutting using the Particle Finite Element Method and homogeneous field distributions

Analysis and modeling of cutting force considering the tool runout effect in longitudinal-torsional ultrasonic vibration-assisted 5 axis ball end milling

Determination of the Cutting-Edge Microgeometry Based on Process Forces during Peripheral Milling of Ti-6Al-4V Using Machine Learning

A Generalised Model of Milling Forces

A prediction model for the milling of thin-wall parts considering thermal-mechanical coupling and tool wear

On the Steady-State Workpiece Flow Mechanism and Force Prediction Considering Piled-Up Effect and Dead Metal Zone Formation

Full life-cycle cutting force prediction in ball helical milling based on oblique cutting analysis