Abstract:The accuracy of 5-axis machine tools is a key factor to manufacture multi-axes machined workpieces. However, thermal deformations of the machine structure often cause significant deviations at the tool centre point. To evaluate the impact of thermal errors on the accuracy of 5-axis machine tools under machining conditions, suitable thermal test pieces are required. Therefore, this paper introduces a 5-axis thermal test piece which is based on the thermal test piece for rotary axes being part of the standard ISO 10791-10:2022. The new thermal test piece identifies ten instead of five thermal errors during eight time steps. The additional features enable an error separation of the table-related thermal error and the thermal error pointing consistently in Z-direction. This error separation is especially important to analyse the accuracy of five-axis milling operations. In total, the developed 5-axis thermal test piece analyses five location, two length and three orientation errors without requiring a kinematic model of the machine tool. The conducted experiments comprise thermal load cases without and with metal working fluid and show a clear agreement between the thermal location errors and the dominant thermal orientation errors of the thermal test piece and an on-machine measurement cycle. On the other hand, the analysed thermal length errors of the thermal test piece indicate a clear effect of the thermal material expansion compared to the thermal positioning errors of the analysed machine tool. Furthermore, the analysed thermal load cases of the linear and rotary axes conducted without and with metal working fluid result in a different thermal behaviour of the machine tool depending on the use of metal working fluid. Finally, the developed 5-axis thermal test piece is used to evaluate a thermally compensated 5-axis machine tool under machining conditions for thermal load cases without and with metal working fluid. The self-learning thermal error compensation reduces the mean of the thermal location errors at the thermal test piece by up to 71%.

Study on new thermal error compensation method for complex surface five-axis machining based on new experimental strategy

Volumetric error modeling and decoupled error compensation analysis of five-axis CNC machine tools

Experiment-based Thermal Error Modeling Method for Dual Ball Screw Feed System of Precision Machine Tool

An Efficient Error Prediction and Compensation Method for Coordinated Five-Axis Machine Tools under Variable Temperature

An Efficient Error Compensation Method for Coordinated CNC Five-Axis Machine Tools

An accurate surface error optimization for five-axis machining of freeform surfaces

Thermal deformation analysis and compensation of the direct-drive five-axis CNC milling head

Modeling and analysis of axial thermal error in machining space of double-swing five-axis machine tool

Position-independent Thermal Error Compensation and Evaluation Based on Linear Correlation Filtering Technology

Thermal error modeling and forecasting for NC machine tools based on intelligent technology

A method of sensitivity analysis and precision prediction for geometric errors of five-axis machine tools based on multi-body system theory

Thermal error detection and compensation technology for spindle of horizontal CNC machine tool with large torque

Thermal Error Modeling and Compensation of a Heavy Gantry-Type Machine Tool and Its Verification in Machining

Thermal Deformation Errors Compensation System of Machine Tools

Validating real time compensation: A thermal test piece for 5-axis machine tools to separate thermal errors in Z-direction

Error Compensation in the Five-Axis Flank Milling of Thin-Walled Workpieces

Geometry Simulation and Evaluation of the Surface Topography in Five-Axis Ball-End Milling

Research On Thermal Error Compensation Instrument Based On Thermal Modal Analysis For Nc Machine Tools

Multi-stage error compensation with closed-loop quality control in five-axis flank milling of sculptured surface

Modeling and compensation of comprehensive errors for thin-walled parts machining based on on-machine measurement

A methodology for systematic geometric error compensation in five-axis machine tools