Abstract:Solution processed field-effect transistors based on single crystalline silicon nanowires (Si NWs) with metal Schottky contacts are demonstrated. The semiconducting layer was deposited from a nanowire ink formulation at room temperature. The devices with 230nm thick SiO2 gate insulating layers show excellent output current-voltage characteristics with early saturation voltages under 2 volts, constant saturation current and exceptionally low dependence of saturation voltage with the gate field. Operational principles of these devices are markedly different from traditional ohmic-contact field-effect transistors (FETs), and are explained using the source-gated transistor (SGT) concept in which the semiconductor under the reverse biased Schottky source barrier is depleted leading to low voltage pinch-off and saturation of drain current. Device parameters including activation energy are extracted at different temperatures and gate voltages to estimate the Schottky barrier height for different electrode materials to establish transistor performance - barrier height relationships. Numerical simulations are performed using 2D thin-film approximation of the device structures at various Schottky barrier heights. Without any adjustable parameters and only assuming low p-doping of the transistor channel, the modelled data show exceptionally good correlation with the measured data. From both experimental and simulation results, it is concluded that source-barrier controlled nanowire transistors have excellent potential advantages compared with a standard FET including mitigation of short-channel effects, insensitivity in device operating currents to device channel length variation, higher on/off ratios, higher gain, lower power consumption and higher operational speed for solution processable and printable nanowire electronics.

Nanoscale vacuum channel transistors fabricated on silicon carbide wafers

Nanoscale Vacuum Channel Transistor

Enabling Atmospheric Operation of Nanoscale Vacuum Channel Transistors

Nanoscale Vacuum Channel Transistor with In-Plane Collection Structure.

Nanotube and Nanowire Transistors

Graphene-Based Nanoscale Vacuum Channel Transistor

A Nanoscale Vacuum Transistor Based on Vertical Silicon Dioxide Tunneling Junctions

A Vacuum Transistor Based on Field-Assisted Thermionic Emission from a Multiwalled Carbon Nanotube

An On-chip Vacuum Transistor Based on a Multiwalled Carbon Nanotube*

Study on electrical properties and structure optimization of side-gate nanoscale vacuum channel transistor

Carbon Nanotube Technology For Solid State And Vacuum Electronics

Nanoelectromechanical Switch with Low Voltage Drive

Planar nanoscale vacuum channel transistors based on resistive switching

Structure Optimization of Planar Nanoscale Vacuum Channel Transistor

Si Nanowire CMOS Transistors and Circuits by Top-Down Technology Approach

High-frequency performance in nanoscale vacuum channel transistors with gate-cathode height difference

Improving the Performance of Nanoscale Vacuum Channel Transistors Via Composite Gate

An On-Chip Vacuum Triode Based on Thermionic Electron Emission from Super-Aligned Carbon Nanotube Films

Si Nanowire - Array Source Gated Transistors

Ultrashort Vertical‐Channel van der Waals Semiconductor Transistors

Carbon nanotube digital electronics