Abstract:Cylindrical grinding of advanced ceramic materials, like silicon nitride, is a crucial machining process for high-precision industrial applications. The goal is to achieve a damage-free surface and subsurface while ensuring high grinding efficiency and desirable material removal rates. For the first time in the cylindrical grinding process, a laser structuring of the Si 3 N 4 workpiece has been employed to structure the material surface before the grinding process. The structuring process is conducted as a time-independent process. The laser structuring aims to generate a controllable damaged zone, which reduces grinding forces and temperature. This reduction subsequently leads to an increase in the achievable material removal rate. A series of line structures parallel to the workpiece axis with different structure percentages has been generated on the circumferential surface of the samples using a nanosecond laser. The influence of laser structuring on thermal damage zones has been microstructurally investigated through SEM and EDS analyses. The thermal damages caused by the laser before the grinding process (exhibiting different microstructures and chemical compositions) are categorized as the recast layer and the heat-affected zone (HAZ). The maximum damage thickness for the recast layer is 2 μm, whereas the thickness of the heat-affected zone is approximately 10 μm. The HAZ thickness could increase up to 50 μm if the snowflakes are placed in close proximity to the thermal damage zone. The study also explored the tangential grinding force and the surface integrity, including characteristics like surface roughness and microstructure of the ground surface in laser-assisted cylindrical grinding. The results indicate that laser structuring substantially reduces the tangential grinding force (up to 75 %). Moreover, the proposed laser-assisted grinding process could achieve a damage-free subsurface and even slightly better ground surface quality compared to the conventional grinding process. This study introduces a novel approach by predicting the grinding allowance through material analysis, aiming for a damage-free surface and subsurface.

Effects of laser beam lead angle on picosecond laser processing of silicon nitride ceramics

Laser Ablation Study of Cutting Ceramics with Consideration of the Beam Inclination Angle

Good-Quality and High-Efficiency Dicing for Thick LiNbO3 Wafers Using Picosecond Laser Pulses

Effects of Incidence Angle and Optimization in Femtosecond Laser Polishing of C/SiC Composites

Parallel Grooved Microstructure Manufacturing on the Surface of Si3N4 Ceramics by Femtosecond Laser

Investigation of laser-assisted cylindrical grinding of silicon nitride ceramics with controlled damage zone

High-Power Femtosecond Laser Processing of SiC Ceramics with Optimized Material Removal Rate

Effect of SiC/SiC composites density on nanosecond-laser machining behaviors

Influence of surface morphology and processing parameters on polishing of silicon carbide ceramics using femtosecond laser pulses

Femtosecond laser modification of silicon carbide substrates and its influence on CMP process

Effect of machining parameter on femtosecond laser drilling processing on SiC/SiC composites

Water jet guided laser grooving of SiC f /SiC ceramic matrix composites

Microstructure evolution and ablation mechanism of SiCf/SiC ceramic matrix composite microgrooves processed by pico-second laser

Investigation of mechanism and surface morphology on the femtosecond laser ablation of silicon nitride under different auxiliary processing environments

Effect of beam profile on nanosecond laser drilling of 4H-SIC

Experimental Study on Femtosecond Laser Processing Performance of Single-Crystal Silicon Carbide

Influence of Pulse Energy and Defocus Amount on the Mechanism and Surface Characteristics of Femtosecond Laser Polishing of SiC Ceramics

Study on the effect of laser-assisted machining on tool wear based on molecular dynamics simulation

Experimental and Simulation Research on Femtosecond Laser Induced Controllable Morphology of Monocrystalline SiC

Experimental study on laser assisted ultrasonic elliptical vibration turning (LA-UEVT) of 70% SiCp/Al composites

Picosecond laser processing of polycrystalline cubic boron nitride — A method to examine the ablation behavior of a high cubic boron nitride content grade material