Abstract:It is well known that diamond is one of the most ideal cutting tool for materials, but the rapid tool wear can make surface integrity of the machined surface decline sharply during the nanometric cutting process for a single crystal silicon. Thus, a research on the wear mechanism of the diamond tool is of tremendous importance for selecting measures to reduce tool wear so as to extend service life of the tool. In this paper, the molecular dynamics simulation is applied to investigating the wear of the diamond tool during nanometric cutting for the single crystal silicon. Tersoff potential is used to describe the CC and SiSi interactions, and also the Morse potential for the CSi interaction. The rake and flank faces are diamond (111) and (112) planes respectively. A new method, by the name of 6-ring, is proposed to describe the bond change of carbon atoms. This new method can extract, all the worn carbon atoms in diamond tool, whose accuracy is higher than the conventional coordination number method. Moreover, the graphitized carbon atoms in the diamond tool also can be extracted by the combination of these two methods. Results show that during the cutting process, the CC bond's breaking in the surface layer of the diamond tool leads to the transformation of hybrid structure of the carbon atoms at both ends of the broken bond, from sp3 to sp2. Following to the bond breaking, the bond angle between the surface carbon atoms increases to 119.3 whose hybrid structure has changed, and the length between nearest neighboring atoms quickly decreases to 0.144 nm, indicating that the space structure formed by these carbon atoms has changed from 3D net structure of diamond to plane structure of graphite. Hence, the carbon atoms in the tool surface whose space structure has changed due to bond breaking should be defined as worn carbon atoms, but not only the carbon atoms whose hybrid structure has changed. The structure defects at both edges of the diamond tool are much more serious, which make the energy of CC bonds at the edges weakened with the enhancement of defects. The bonds with lower energy are broken under the effect of high temperature and shear stress, which also produces the tool wear. The graphitization occurs at the tool of the cutting tool because the structure defects there are the most serious. The reconstruction of the carbon atoms with lower coordination number causes its neighboring region to produce serious distortion, which leads to easy breaking of CC bonds in this region.

Study on the effect of laser-assisted machining on tool wear based on molecular dynamics simulation

Influence of laser nanostructured diamond tools on the cutting behavior of silicon by molecular dynamics simulation

Mechanisms involved in the tool life improvement of laser assisted machining 45%SiCp/Al composites

A Molecular Dynamics Investigation into the Mechanisms of Material Removal and Subsurface Damage of Nanoscale High Speed Laser-Assisted Machining

Comparison of Subsurface Damages on Mono-Crystalline Silicon Between Traditional Nanoscale Machining and Laser-Assisted Nanoscale Machining Via Molecular Dynamics Simulation

Carbide Tool Wear Mechanisms in Laser-Assisted Machining of Metal Matrix Composites

Investigation on system design methodology and cutting force optimization in laser-assisted diamond machining of single-crystal silicon

Analysis about Diamond Tool Wear in Nano-Metric Cutting of Single Crystal Silicon Using Molecular Dynamics Method

Experimental and Theoretical Investigation on the Ductile Removal Mechanism in In-Situ Laser Assisted Diamond Cutting of Fused Silica

A numerical study of ultraprecision machining of monocrystalline silicon with laser nano-structured diamond tools by atomistic simulation

Experimental Research on Laser Assisted Machining of Silicon Nitride Ceramics

Modeling and Simulation of the Tool Wear in Nanometric Cutting

Molecular Dynamic Simulation of Micro-Structured Diamond Tool in Silicon Carbide Cutting

Cutting mechanism of reaction-bonded silicon carbide in laser-assisted ultra-precision machining

Experimental Investigation of the Machinability of Single Crystal Silicon in Laser-Assisted Diamond Cutting

Experimental investigations on the laser-assisted machining of single crystal Si for optimal machining

Cutting performance and coated tool wear mechanisms in laser-assisted milling K24 nickel-based superalloy

Effect of C-C Bond Breakage on Diamond Tool Wear in Nanometric Cutting of Silicon

Influence of Tool Wear on Cutting Mechanism of Single Point Diamond Turning of Silicon

Enhancing the Ductile Machinability of Single-Crystal Silicon by Laser-Assisted Diamond Cutting

Study on the Carbide Tool Wear Mechanisms in Micro Milling Stair-Shape Target of LiF Crystal