Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. The pressing demand of Ti-6Al-4V (grade 5) in aerospace, medical, marine, and chemical processing industries has gained momentum in recent years due to its excellent properties such as high strength to weight ratio and corrosion resistance, bio-compatibility and a common material for additive manufacturing. Additive manufactured Ti-6Al-4V have higher mechanical properties as compared to wrought alloys due to difference in microstructure that negatively influences the machinability characteristics and also lacks ductility. The main limitation of fabricated additive manufactured (AMed) component is the poor surface quality, staircase effect and adhering of non-melted powder particles to the fabricated components. Again, fatigue life of components increases with decrease of surface roughness. Therefore the need of machining of AMed titanium alloys in recent years are gaining importance to eliminate these problems so that desired surface quality and tolerances can be achieved. Therefore the objective of the study is to develop additive manufactured Ti-6Al-4V through direct metal laser sintering process and investigate its machinability characteristics under flood cooling environment with respect to responses as tool wear, surface roughness, cutting temperature, and chip morphology. As most of the heat generated at the interfaces has been carried away through flood cooling, the rate of growth of tool wear, cutting temperature, surface roughness, and degree of serration decreases and thus makes the performance of AMed Ti alloys are comparable with wrought Ti alloys. The dominant tool wear mechanism during machining AMed Ti alloy have been found to be abrasion, chipping, adhesion, BUE, chemical interaction between titanium and cutting tool materials, coating delamination. Optimal parameters for multi-responses are 0.1 mm depth of cut, 0.1 mm/rev feed rate, and 70 m/min cutting speed and improved. Mathematical models are said to be significant and fitted well. Because of the improved machinability, AMed Ti alloys find itself suitable in industrial applications.

Improved direct laser assisted machining of Al 7075-T6 and Ti-6Al-4V using cubic zirconia tool

Comparative study on machinability and surface integrity of γ-TiAl alloy in laser assisted milling

Cutting performance and coated tool wear mechanisms in laser-assisted milling K24 nickel-based superalloy

Tool Wear Mechanisms in Axial Ultrasonic Vibration Assisted Milling In-Situ TiB2/7050Al Metal Matrix Composites

The mechanism and machinability of laser-assisted machining zirconia ceramics

Study on the effect of laser-assisted machining on tool wear based on molecular dynamics simulation

Mechanisms involved in the tool life improvement of laser assisted machining 45%SiCp/Al composites

Machining characteristics of Ti6Al4V alloy in laser-assisted machining under minimum quantity lubricant

Carbide Tool Wear Mechanisms in Laser-Assisted Machining of Metal Matrix Composites

Experimental and Theoretical Investigation on the Ductile Removal Mechanism in In-Situ Laser Assisted Diamond Cutting of Fused Silica

Hybrid simultaneous laser- and ultrasonic-assisted machining of Ti-6Al-4V alloy

Experimental study on laser assisted ultrasonic elliptical vibration turning (LA-UEVT) of 70% SiCp/Al composites

Machinability performance and mechanism in milling of additive manufactured Ti6Al4V with polycrystalline diamond tool

Thermal analysis of in-situ laser assisted diamond cutting of fused silica and process optimization

Study on machinability characteristics of novel additive manufactured titanium alloy (Ti-6Al-4V) fabricated by direct metal laser sintering

Experimental and FEM study of surface formation and deformation mechanism of SiCp/Al composites in laser-ultrasonic vibration assisted turning

Enhancing machinability of Ti6Al4V by ultrashort-pulse laser-induced modification assisted grinding

Experimental Study on Laser Assisted Milling of Sintered Silicon Nitride Ceramics

Experimental Study on Laser-Assisted Machining of SiCp/Al Composites Considering Laser Preheating History Based on In-Situ Observation

Cutting performance and surface quality of Ti-6Al-4V by longitudinal ultrasonic vibration-assisted high-speed dry milling with coated carbide tools

Study on the surface layer formation of aluminum matrix composites and associated machinability in precision milling based on laser melting modification