Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. The pressing demand of Ti-6Al-4V (grade 5) in aerospace, medical, marine, and chemical processing industries has gained momentum in recent years due to its excellent properties such as high strength to weight ratio and corrosion resistance, bio-compatibility and a common material for additive manufacturing. Additive manufactured Ti-6Al-4V have higher mechanical properties as compared to wrought alloys due to difference in microstructure that negatively influences the machinability characteristics and also lacks ductility. The main limitation of fabricated additive manufactured (AMed) component is the poor surface quality, staircase effect and adhering of non-melted powder particles to the fabricated components. Again, fatigue life of components increases with decrease of surface roughness. Therefore the need of machining of AMed titanium alloys in recent years are gaining importance to eliminate these problems so that desired surface quality and tolerances can be achieved. Therefore the objective of the study is to develop additive manufactured Ti-6Al-4V through direct metal laser sintering process and investigate its machinability characteristics under flood cooling environment with respect to responses as tool wear, surface roughness, cutting temperature, and chip morphology. As most of the heat generated at the interfaces has been carried away through flood cooling, the rate of growth of tool wear, cutting temperature, surface roughness, and degree of serration decreases and thus makes the performance of AMed Ti alloys are comparable with wrought Ti alloys. The dominant tool wear mechanism during machining AMed Ti alloy have been found to be abrasion, chipping, adhesion, BUE, chemical interaction between titanium and cutting tool materials, coating delamination. Optimal parameters for multi-responses are 0.1 mm depth of cut, 0.1 mm/rev feed rate, and 70 m/min cutting speed and improved. Mathematical models are said to be significant and fitted well. Because of the improved machinability, AMed Ti alloys find itself suitable in industrial applications.

Hybrid simultaneous laser- and ultrasonic-assisted machining of Ti-6Al-4V alloy

Process parameters influence on cutting force and surface roughness during hybrid laser- and ultrasonic elliptical vibration-assisted machining

Optimization Milling Force and Surface Roughness of Ti-6Al-4V Based on Ultrasonic-Assisted Milling (UAM): An Experimental Study

Hybrid-hybrid turning of micro-SiCp/AA2124 composites: A comparative study of laser-and-ultrasonic vibration-assisted machining

Performance Analysis of the Longitudinal-Torsional Ultrasonic Milling of Ti-6Al-4V

Comparative study on machinability and surface integrity of γ-TiAl alloy in laser assisted milling

Study on machinability characteristics of novel additive manufactured titanium alloy (Ti-6Al-4V) fabricated by direct metal laser sintering

Research on Homogenization and Surface Integrity of Ti-6Al-4V Alloy by Longitudinal-Torsional Coupled Ultrasonic Vibration Ball-End Milling

Optimizing Processing Parameters and Surface Quality of TC18 via Ultrasonic-Assisted Milling (UAM): An Experimental Study

Machining characteristics of Ti6Al4V alloy in laser-assisted machining under minimum quantity lubricant

Hybrid Fabrication of Cold Metal Transfer Additive Manufacturing and Laser Metal Deposition for Ti6Al4V: The Microstructure and Dynamic/Static Mechanical Properties

Experimental study on laser assisted ultrasonic elliptical vibration turning (LA-UEVT) of 70% SiCp/Al composites

An experimental investigation on the effects of combined application of ultrasonic assisted milling (UAM) and minimum quantity lubrication (MQL) on cutting forces and surface roughness of Ti-6AL-4V

Laser-Assisted Milling of Turbine Blade Using Five-Axis Hybrid Machine Tool with Laser Module

Study on Ultra-Precision Processing of Ti-6Al-4V with Different Ultrasonic Vibration-Assisted Cutting Modes

Enhanced dry machinability of TC4 titanium alloy by longitudinal-bending hybrid ultrasonic vibration-assisted milling

Novel hybrid machining process of titanium alloy for texturing high-quality microstructure array surfaces

Enhancing machinability of Ti6Al4V by ultrashort-pulse laser-induced modification assisted grinding

Design and surface analysis in large-amplitude longitudinal ultrasonic vibration-assisted milling of TC4 titanium alloy under dry conditions

Effects of machining surface and laser beam scanning strategy on machinability of selective laser melted Ti6Al4V alloy in milling

Experimental Study on Ultrasonic Assisted Turning of GH4068 Superalloy