Abstract:Ti6Al4V alloy is one of the typical difficult-to-machine materials and often results in rapid tool wear, leading to poor machining quality in aircraft assembling. Compared to conventional helical milling, the ultrasonic assistant helical milling (UAHM) process has indicated its superior performance; however, it is still a great challenge to improve the hole surface quality and accuracy. In addition, few studies have been conducted on the effect of different variables and cooling strategies on the hole-making performance in longitudinal-torsional ultrasonic assisted helical milling (LT-UAHM). This paper, for the first time, reports effects of machining variables on geometric precision and surface roughness in LT-UAHM of Ti6Al4V. In addition, the lubrication/cooling mechanism on the simultaneous application of LT-UAHM and MQL is theoretically analyzed. The design approach of Taguchi experiment was employed to study how major variables such as the cutting speed, tangential feed, axial feed, and the workpiece hardness influence the dimensional and geometrical tolerances and surface roughness. This paper also discussed the effect of three cooling strategies, i.e., dry condition, air coolant, and minimum quantity lubrication (MQL) in LT-UAHM. Theoretical analysis demonstrated that the MQL coolant can be nebulized into hyper-fine droplets owing to the resonant cavitation phenomenon. Combined with the penetrating action caused by the separate-cutting principles of LT-UAHM, the cooling and lubrication performance of MQL was further enhanced. As a result, LT-UAHM with MQL had the most positive effect on circularity, cylindricity, nominal diameter, and surface roughness, contributing to 34%, 32%, 39%, and 40%, respectively. The second important machining factor was the cutting speed, contributing to 31%, 29%, 36%, and 22%, respectively. The tangential feed and workpiece hardness have the negative effect on geometrical accuracy, respectively.

Study on Ultra-Precision Processing of Ti-6Al-4V with Different Ultrasonic Vibration-Assisted Cutting Modes

Analytical modelling and experimental study of surface roughness in ultrasonic elliptical vibration assisted ultra-precision cutting of Ti-6Al-4 V alloy

Effect of UEVC parameters on cutting surface quality and subsurface damage of single crystal γ-TiAl alloy via atomic simulation

Performance Analysis of the Longitudinal-Torsional Ultrasonic Milling of Ti-6Al-4V

Investigation of Surface Integrity of Selective Laser Melting Additively Manufactured AlSi10Mg Alloy under Ultrasonic Elliptical Vibration-Assisted Ultra-Precision Cutting

Experimental Study on Cutting Force and Surface Integrity of TC4 Titanium Alloy with Longitudinal Ultrasonic-Assisted Milling

The material removal mechanism and surface characteristics of Ti-6Al-4 V alloy processed by longitudinal-torsional ultrasonic-assisted grinding

Cutting performance and surface quality of Ti-6Al-4V by longitudinal ultrasonic vibration-assisted high-speed dry milling with coated carbide tools

Study on the Simulation and Experiment of Ultrasonic-assisted Vibration Drilling of Ti6Al4V

Effect of high-speed ultrasonic vibration cutting on the microstructure, surface integrity, and wear behavior of titanium alloy

Optimization Milling Force and Surface Roughness of Ti-6Al-4V Based on Ultrasonic-Assisted Milling (UAM): An Experimental Study

Research on Homogenization and Surface Integrity of Ti-6Al-4V Alloy by Longitudinal-Torsional Coupled Ultrasonic Vibration Ball-End Milling

Influence of cutting velocity on surface roughness during the ultra-precision cutting of titanium alloys based on a comparison between simulation and experiment

Study on the Material Removal Mechanism of Ultrasonic Elliptical Vibration Cutting of Medical β Titanium Alloy

Surface feature and material removal in ultrasonic vibration-assisted slot-milling of Ti–6Al–4 V titanium alloy

Surface quality investigation in high-speed dry milling of Ti-6Al-4V by using 2D ultrasonic-vibration-assisted milling platform

Investigation on cutting performance in ultrasonic assisted helical milling of Ti6Al4V alloy by various parameters and cooling strategies

Experimental Study on Ultra-Precision Polishing of Ti-6Al-4V by Ultraviolet-Induced Nanoparticle Colloid Jet Machining

Generation mechanism of the surface morphology on tilted ultrasonic elliptical vibration cutting TC4 titanium alloy

Ultrasonic vibration assisted milling of titanium alloy microchannel