Abstract:Modern aviation components have higher requirements for high temperature resistance, high strength and lightweight materials, and ceramic matrix composites have superior overall performance. However, its high brittleness and anisotropy lead to a challenge for manufacturing. In order to understand the formation conditions and the evolution of surface microstructures of the Cf/SiC microgrooves processed by ultrafast laser comprehensively, we designed a single-factor experiment and performed sensitivity analysis. The experiment results showed that the pulse energy had great effects on the depth of the microgroove, and the intense ablation caused more active oxidation of SiC to occur, generating more SiO(g). However, too much pulse energy may cause the material removal mechanism to be more due to the photothermal effect rather than the plasma effect. Low repetition frequency caused a large number of laminated connections in the microgroove and the oxide gradually changed from lumpy to flocculent as the repetition frequency increased. The more scanning times, the more ablation products sputtered onto the sample surface, including unablated carbon fibers. Shallow depth and ablation residues remained in the microgroove occurred under few scanning times. Although too fast scanning speed leaded to a rapid decrease in the microgroove depth, too slow scanning speed also generated more unablated carbon fibers sputtering out of the microgrooves. The microgroove depth had the highest sensitivity to the repetition frequency, followed by the pulse energy and scanning speed. The pulse energy and scanning speed had a greater effect on the oxide layer height, the repetition frequency affected the oxide layer width, and the scanning speed affected the microgroove width significantly. According to the processing requirements and the hot spot map, the processing parameters that can be adjusted effectively will be able to be obtained.

Microstructure evolution and ablation mechanism of SiCf/SiC ceramic matrix composite microgrooves processed by pico-second laser

Surface microstructure evolution of Cf/SiC ceramic matrix composite microgrooves processed by ultrafast laser

Influence of surface morphology on processing of C/SiC composites via femtosecond laser

Mechanism and morphology control of underwater femtosecond laser microgrooving of silicon carbide ceramics.

Water jet guided laser grooving of SiC f /SiC ceramic matrix composites

Investigations on the ablation behavior of C/SiC under femtosecond laser

Understanding Machinability Improvements and Removal Mechanism of Ceramic Matrix Composites During Laser-Ablating Assisted Grinding

Micro-grooves Machining and Optimizing on SiC/SiC Composites by Femtosecond Laser-Based on Response Surface Methodology

Water Jet Guided Laser Grooving of Sicf/Sic Ceramic Matrix Composites

Laser ablation behavior and mechanism of Cf/C–SiC composites under different laser energy densities

Theoretical and Experimental Investigation on SiC/SiC Ceramic Matrix Composites Machining with Laser Water Jet

Revealing Damage Evolution and Ablation Behavior of SiC/SiC Ceramic Matrix Composites by Picosecond Laser High-Efficiency Ablation

Experimental Study on the Influence of Ultraviolet Laser Parameters on the Microstructure Machining Quality of Silicon Carbide Ceramic

Comprehensive Investigation into Grinding Characteristics and Damage Behavior of Cf/SiC Composite Modified by Picosecond-Laser Ablating

Removal mechanism of SiC/SiC composites by underwater femtosecond laser ablation

Investigations on the oxidation behavior and removal mechanism of SiC/SiC composites by multi-pulse femtosecond laser ablation

Laser ablation of SiC/SiC ceramic matrix composites: Morphological characterization, component evolution and oxidation mechanisms

Investigations on Continuous-Wave Laser and Pulsed Laser Induced Controllable Ablation of SiCf/SiC Composites

Understanding Laser Ablating Mechanism of Cf/SiC Composites: Micro Heat Transfer and Subsurface Microstructure Transformation

Heterogeneous ablation behavior of SiCf/SiC composite by nanosecond pulse laser

Character and Mechanism of Surface Micromachining for C/SiC Composites by Ultrashort Plus Laser