Abstract:The principle of a lock-in thermography for non-destructive tests was researched and the evaluation,defect depth measurement and its application to the detection of honeycomb structure materials and welding bearings were introduced.A Finite Difference Model(FDM)of 2D heat conduction was established and it then was used to compute the temperature variety process on the surface of samples under the condition of sine law modulated heat flux.The lock-in processing method was applied to extract the quasi-steady state temperature variety of the defect and non-defect regions and the phase differences between them was computed.Furthermore,a thermal-electronic equivalence modeling was established by analog to the fundamental laws of heat and electricity,and it was used to simulate the lock-in thermography.The relation between defect depth and phase difference of both incident and reflected thermal waves was obtained.Finally,non-destructive tests were carried out on a honeycomb structure sample with simulated defects and a real welding bearing by the lock-in thermography.Experimental results indicate that the phase deference between defect and non-defect regions obtained by the finite difference model and thermal-electrical equivalence modeling is close to the experimental result,and the bias error is less than 5% as well.The lock-in thermography can rapidly and exactly detect defect sizes and positions,and can be also used in the measurement for the curve surface of a structure.

Thermographic inspection of water ingress in composite honeycomb sandwich structure: a quantitative comparison among Lock-in thermography algorithms

Debonds and Water-Filled Defects Detection in Honeycomb Sandwich Composites Based on Pulse Infrared Thermography NDT Technique

Detecting and Evaluating Water Ingress in Horizontally Oriented Aviation Honeycomb Panels by Using Automated Thermal Nondestructive Testing

Defect detection of GFRP/Nomex honeycomb sandwich structure by linear frequency modulation infrared thermal imaging

Study on debonding defects detection of CFRP / Al honeycomb structure by Square-wave thermography

Detection of Unbonds in Honeycomb Sandwich Structure Using Lock-In Thermography

Health monitoring of the composite honeycomb insulation panels using thermographic image processing

Evaluating Water Ingress in Glass Fiber Plastic/Nomex Honeycomb Panels under Varying Panel Orientation

LFM-Chirp-Square pulse-compression thermography for debonding defects detection in honeycomb sandwich composites based on THD-processing technique

Opportunities for using the thermal imaging method of nondestructive inspection for skin delamination diagnosis in honeycomb structures used in modern aircraft

Research on Lock-in Thermography for Aerospace Materials of Nondestructive Test Based on Image Sequence Processing

Inspection Of Defects In Cfrp-Foam Layered Structure Composite Plates Of Aerospace Materials Using Lock-In Thermography

Thermal Wave Detection and Defect Depth Measurement Based on Lock-in Thermography

Nde of Composites Delamination by Infrared Thermography

Multi-frequency Fused Lock-in Thermography in Detecting Defects at Different Depths

Investigating the Excellence of Different Thermography Approaches to Subsurface Dis-bonds Detection in Aluminum Honeycomb Sandwich Structures

Theoretical and Experimental Study on Carbon/epoxy Facings-Aluminum Honeycomb Sandwich Structure Using Lock-in Thermography

Near-field Microwave Identification and Quantitative Evaluation of Liquid Ingress in Honeycomb Sandwich Structures

A Comparison among Different Ways to Investigate Composite Materials with Lock-In Thermography: The Multi-Frequency Approach

Terahertz Nondestructive Testing of Honeycomb Composites Based on FMCW Technology

Inverse Heat Transfer Approach for Nondestructive Estimation the Size and Depth of Subsurface Defects of CFRP Composite Using Lock-in Thermography