Abstract:Honeycomb sandwich panels are utilized in many industrial applications due to their high bending resistance relative to their weight. Defects between the core and the facesheet compromise their integrity and efficiency due to the inability to transfer loads. The material system studied in the present paper is a unidirectional carbon fiber composite facesheet with a honeycomb core with a variety of defects at the interface between the two material systems. Current nondestructive techniques focus on defect detectability, whereas the presented method uses high-frequency ultrasound testing (UT) to detect and quantify the defect geometry and defect type. Testing is performed using two approaches, a laboratory scale immersion tank and a novel portable UT system, both of which utilize only single-side access to the part. Coupons are presented with defects spanning from 5 to 40 mm in diameter, whereas defects in the range of 15–25 mm and smaller are considered below the detectability limits of existing inspection methods. Defect types studied include missing adhesive, unintentional foreign objects that occur during the manufacturing process, damaged core, and removed core sections. An algorithm is presented to quantify the defect perimeter. The provided results demonstrate successful defect detection, with an average defect diameter error of 0.6 mm across all coupons studied in the immersion system and 1.1 mm for the portable system. The best accuracy comes from the missing adhesive coupons, with an average error of 0.3 mm. Conversely, the worst results come from the missing or damaged honeycomb coupons, with an error average of 0.7 mm, well below the standard detectability levels of 15–25 mm.

Opportunities for using the thermal imaging method of nondestructive inspection for skin delamination diagnosis in honeycomb structures used in modern aircraft

Detecting and Evaluating Water Ingress in Horizontally Oriented Aviation Honeycomb Panels by Using Automated Thermal Nondestructive Testing

Health monitoring of the composite honeycomb insulation panels using thermographic image processing

Nde of Composites Delamination by Infrared Thermography

Defect Detection in Aerospace Sandwich Composite Panels Using Conductive Thermography and Contact Sensors

Evaluating Water Ingress in Glass Fiber Plastic/Nomex Honeycomb Panels under Varying Panel Orientation

LFM-Chirp-Square pulse-compression thermography for debonding defects detection in honeycomb sandwich composites based on THD-processing technique

J046033 Evaluation of Delamination in Fiber Reinforced Composites by Microwave Propagation Theory

Investigating the Excellence of Different Thermography Approaches to Subsurface Dis-bonds Detection in Aluminum Honeycomb Sandwich Structures

Application of the Pulse Infrared Thermography Method for Nondestructive Evaluation of Composite Aircraft Adhesive Joints

Nondestructive Inspection and Quantification of Select Interface Defects in Honeycomb Sandwich Panels

Defect detection of GFRP/Nomex honeycomb sandwich structure by linear frequency modulation infrared thermal imaging

Features of Thermal Nondestructive Testing of Impact Damage to Products Made of Polymer Composite Materials

Identifying Defects in Aerospace Composite Sandwich Panels Using High-Definition Distributed Optical Fibre Sensors

Surface Profiling and Core Evaluation of Aluminum Honeycomb Sandwich Aircraft Panels Using Multi-Frequency Eddy Current Testing

A novel nondestructive testing method for honeycomb structure using acoustic band gap

ACOUSTIC NON-DESTRUCTIVE TESTING OF MULTILAYERED STRUCTURES FROM PCM DURING THE PRODUCTION AND OPERATION OF AVIATION TECHNIQUE

Measurement Methodology: Terahertz Technique: A Non-Destructive Testing Method for Composite Defect Detection

Guided wave energy trapping to detect hidden multilayer delamination damage

Recent Advances in Active Infrared Thermography for Non-Destructive Testing of Aerospace Components

NDE of Corrosion and Disbonding on Aircraft Using Thermal Wave Imaging