Abstract:Purpose The purpose of this paper is to validate an assumption of what to use as an effective (steady state) heat transfer coefficient of thermal conductivity for the honeycomb core sandwiched by Fiberglass face sheets composite. A one-dimensional model based on Fourier law is developed. The results are validated experimentally. Design/methodology/approach The results were obtained from the one-dimensional mathematical model of an overall or effective heat conductivity of the Honeycomb composite panel. These results were validated experimentally by applying heat flux on the specimen under controlled environment. The surface temperatures at different voltages were recorded and analysed. The skin of the sandwich composite material used in the investigation was Fiberglass sheet with a thickness of 0.5 mm at the bottom and 1.0 mm at the top surface. Both skins have a stacking sequence of zero degrees. Due to the presence of air cells in the core (Honeycomb), the model considers the conduction, convection and radiation heat transfer, across the thickness of the panel, combined as an effective conduction mode, whose value may be predicted by using the coefficient of thermal conductivity of the air based on the average temperature difference between the two skins. The experimental results for the heat transfer through the thickness of the panel provide validation of this assumption/prediction. Both infrared thermography and conventional temperature measurement techniques (thermocouples) were used to collect the data. Findings The heat transfer experiment and mathematical modeling were conducted. The data obtained were analyzed, and it was found that the effective thermal conductivity was temperature-dependent as expected. The effective thermal conductivity of the honeycomb panel was close to that of air, and its value could be predicted if the panel surface temperatures were known. It was also found that as temperature raised the variation between experimental and predicted effective air conduction raised up. This is because there was an increase in molecular diffusion and vibration. Therefore, the convection heat transfer increased at high temperatures and the air became an insulator. Originality/value Honeycomb composite panels have excellent physical and thermal properties that influence their performance. This study provides an appropriate method in determining thermal conductivity, which is one of the critical thermal properties of porous composite material. This paper also gives useful and practical data to industries that use or manufacture honeycomb composite panels.

Evaluating Water Ingress in Glass Fiber Plastic/Nomex Honeycomb Panels under Varying Panel Orientation

Detecting and Evaluating Water Ingress in Horizontally Oriented Aviation Honeycomb Panels by Using Automated Thermal Nondestructive Testing

Opportunities for using the thermal imaging method of nondestructive inspection for skin delamination diagnosis in honeycomb structures used in modern aircraft

Near-field Microwave Identification and Quantitative Evaluation of Liquid Ingress in Honeycomb Sandwich Structures

Experimental and numerical investigation on indentation and energy absorption of a honeycomb sandwich panel under low-velocity impact

Health monitoring of the composite honeycomb insulation panels using thermographic image processing

Nondestructive Inspection and Quantification of Select Interface Defects in Honeycomb Sandwich Panels

Effective heat conductivity of Honeycomb (porous) composite panel

Non-destructive evaluation of a composite honeycomb sandwich panel with in-plane waviness damage using ultrasonic guided waves

Surface Profiling and Core Evaluation of Aluminum Honeycomb Sandwich Aircraft Panels Using Multi-Frequency Eddy Current Testing

Investigations of ice impact damage and residual performance of 3D angle-interlock woven composites based on in-situ sampling

Defect Detection in Aerospace Sandwich Composite Panels Using Conductive Thermography and Contact Sensors

Damage Resistance of Honeycomb Sandwich Composites under Low-Energy Impact

Study on the Dynamic Crushing Behaviors of Hourglass Honeycomb Sandwich Panels

Compressive response and failure mode of glass fiber reinforced polyimide composite honeycomb with cell wall defects

In situ near-field microwave characterization and quantitative evaluation of phase change inclusion in honeycomb composites

Defect detection of GFRP/Nomex honeycomb sandwich structure by linear frequency modulation infrared thermal imaging

Innovation in Aircraft Cabin Interior Panels Part I: Technical Assessment on Replacing the Honeycomb with Structural Foams and Evaluation of Optimal Curing of Prepreg Fiberglass

A Prototype Method for Diagnosing High Ice Water Content Probability Using Satellite Imager Data

Dynamic response of GFRP/Nomex honeycomb sandwich panels subjected to multiple hail impacts – An experimental study

Experimental and numerical investigation of impact behavior in honeycomb sandwich composites