Abstract:Long pulse thermography (LPT) and shearography have been developed as primary methods for detecting debonding or delamination defects in composites due to their full-field imaging, non-contact operation, and high detection efficiency. Both methods utilize halogen lamps as the excitation source for thermal loading. However, the defects detected by the two techniques differ due to their distinct inspection mechanisms. In this study, LPT and shearography are employed to evaluate internal damage in various composite structures. The experimental results demonstrate that LPT, when combined with thermal signal processing algorithms, can clearly detect debonding defects in rubber-to-metal bonded plates, whereas excessive adhesive defects can only be identified by shearography. Flat-bottom holes in the CFRP panel can only be detected by LPT, and shearography is particularly effective for detecting composite materials with a metal skin. For the quantitative measurement of defect sizes, the average errors of the rubber-to-metal bonded plate and CFRP panel using LPT are 4.9 % and 2.2 %, respectively, whereas the average errors of the rubber-to-metal bonded plate and aluminum honeycomb panel using shearography are 15.12 % and 95.4 %, respectively. This indicates that LPT is superior to shearography in quantitatively measuring defect sizes. These two nondestructive testing methods, based on different principles, each have their own advantages and disadvantages. Employing a multi-modal inspection method can leverage their complementary advantages, preventing misdetection and leakage of internal defects in composites.

Nde of Composites Delamination by Infrared Thermography

Inspection of defects in composite structures using long pulse thermography and shearography

J046033 Evaluation of Delamination in Fiber Reinforced Composites by Microwave Propagation Theory

Opportunities for using the thermal imaging method of nondestructive inspection for skin delamination diagnosis in honeycomb structures used in modern aircraft

Health monitoring of the composite honeycomb insulation panels using thermographic image processing

Infrared defect recognition technology for composite materials

Defect detection of GFRP/Nomex honeycomb sandwich structure by linear frequency modulation infrared thermal imaging

Nondestructive Evaluation of Composite Bonding Structure Used in Electrical Insulation Based on Active Infrared Thermography

Development and Application of Infrared Thermography Non-Destructive Testing Techniques

Distance Effect in Transient Thermography for Internal Defects Detection in Composites

Carbon fiber composites inspection and defect characterization using active infrared thermography: numerical simulations and experimental results

Independent component thermography for non-destructive testing of defects in polymer composites

LFM-Chirp-Square pulse-compression thermography for debonding defects detection in honeycomb sandwich composites based on THD-processing technique

Analysis of data processing methods for pulsed thermal imaging characterisation of delaminations

Measurement Methodology: Terahertz Technique: A Non-Destructive Testing Method for Composite Defect Detection

A Review of Infrared Thermography for Delamination Detection on Infrastructures and Buildings

Detection and identification of delamination defects in CFRP laminates using nonlinear frequency-modulated infrared thermal wave testing technology

Thermal Nondestructive Testing of Composite and Metal Parts Manufactured by Additive Technologies

Investigating the Excellence of Different Thermography Approaches to Subsurface Dis-bonds Detection in Aluminum Honeycomb Sandwich Structures

Use of line laser scanning thermography for the defect detection and evaluation of composite material

INFRARED THERMOGRAPHY TECHNIQUE FOR DAMAGE DETECTION ON COMPOSITE MATERIALS UNDER LOW-ENERGY IMPACT