Abstract:Airborne ultrasonic testing of lightweight, structured composite materials enables fast and contact-free non-destructive testing in aerospace and avoids material degradation due to contact with a coupling liquid. Established resonant air-coupled transducers consist of piezocomposite materials and several matching layers or more advanced materials like charged cellular polypropylene. The relaxation time and the specific frequency of such mechanical ultrasound emitters limit the spectrum of applications for each device. A short pulse length is key for reliable defect detection and each component at test can be best characterized at material- and geometry-specific frequencies. Here we show that focused thermoacoustic transducers are suited for testing lightweight, structured composite plates. Since the ultrasound is generated in air, these transducers show no resonance behavior and emit a broadband acoustic spectrum between 1.2 kHz and 1 MHz. Composite specimens of 3 mm to 9 mm thickness made of polylactide with a honeycomb structure were tested. Flat bottom holes were introduced to quantify the spatial resolution of the imaging method inside the strongly anisotropic specimen. As no broadband receivers are available yet, cellular polypropylene transducers were used as receivers, which limits the bandwidth of the method towards the bandwidth of the receiver. Nevertheless, we demonstrate the competitiveness of the thermoacoustic transducer compared to mechanical emitters at their respective resonance frequencies. Because a thermoacoustic transmitter features a nearly ideal pulse width, a single transmitter can be coupled with receivers with different resonance frequencies. With the development of broadband ultrasound receivers, air-coupled ultrasound spectroscopy will likely be possible in the near future. The analyzed transducer holds the potential to speed up testing during production and maintenance in aerospace and automotives. Its combination with a broadband receiver could also expand the application field of air-coupled ultrasonic testing from a qualitative error detection towards a quantitative, spatially resolved analysis of mechanical material properties.

Thermal Nondestructive Testing of Composite and Metal Parts Manufactured by Additive Technologies

Detecting Defects in Composites Using Combined Heating/Cooling: Theory and Experiments

Features of Thermal Nondestructive Testing of Impact Damage to Products Made of Polymer Composite Materials

Numerical Modelling of the Heat Source and the Thermal Response of an Additively Manufactured Composite during an Active Thermographic Inspection

Specific Features of Nondestructive Testing of Polymer and Composite Materials Using Air-Coupled Ultrasonic Excitation and Laser Vibrometry

The Detection and Characterization of Defects in Metal/Non-metal Sandwich Structures by Thermal NDT, and a Comparison of Areal Heating and Scanned Linear Heating by Optical and Inductive Methods

Applications of Thermography and Ultrasonics for Detection of Debonding in Carbon Fibre Reinforced Composite Panels

INFRARED THERMOGRAPHY TECHNIQUE FOR DAMAGE DETECTION ON COMPOSITE MATERIALS UNDER LOW-ENERGY IMPACT

Thermal Tomography 3D Imaging of Additively Manufactured Metallic Structures

Thermal Nondestructive Testing: Development of Conventional Directions and New Trends (A Review)

3D photothermal reconstruction of subsurface defects in notched multidirectional CFRP laminates due to tensile fatigue loading

Nondestructive testing of composite T-Joints by TNDT and other methods

Ultrasonic Testing of Carbon Fiber-Reinforced Polymer Composites

Comparative study of active infrared thermography, ultrasonic laser vibrometry and laser ultrasonics in application to the inspection of graphite/epoxy composite parts

Nondestructive Testing of Composite Materials: An In-Depth Study Using Ultrasonic Immersion Inspection

Non-Destructive Thermography Analysis of Impact Damage on Large-Scale CFRP Automotive Parts

Efficiency of using different types of infrared imagers in active thermal nondestructive testing of delaminations in non-metals

The thermoacoustic effect and its application in air-coupled testing of composite structures

Thermal non‐destructive testing and evaluation for inspection of carbon fibre‐reinforced polymers

Nde of Composites Delamination by Infrared Thermography

Carbon fiber composites inspection and defect characterization using active infrared thermography: numerical simulations and experimental results