Abstract:Fast development of automotive industry increases demands in terms of fuel efficiency, reduction of weight and increased reliability of constructions. Nowadays major materials for production of pistons are cast iron, Aluminum–Silicon (Al-Si) alloys and some composites. Use of hypereutectic Al-Si alloys is increasing in automobile and aerospace industry. Application of hypereutectic Al-Si alloys with more than 12wt.% of Si is due to their properties like good thermal and electrical conductivity, high strength to weight ratio, good corrosion resistance and others. Higher Si content in the alloy can affect its properties; it increases size of primary Si and hardness but reduces machinability. In order to improve their properties and meet the high requirements of the industry, usually, grain refinement of these alloys is needed. Some of the ways to obtain grain refinement and potentially improve hypereutectic Al-Si alloys' properties are different manufacturing technologies, heat treatments and/or addition of grain refiners like Ni, Mg, Sr, Sn and many others. There is a large amount of manufacturing technologies used for hypereutectic Al-Si alloys, and in this paper will be considered most of them, as well as their influence on microstructure, mechanical and tribological properties of hypereutectic Al-Si alloys and composites. Also, the effect of higher Si content in the hypereutectic Al-Si alloy on its properties will be considered, as well as addition of modificator/refiner or reinforcement. Liquid state processes are usually used for hypereutectic Al-Si alloys, but some newer (semi-solid and solid processes) have emerged that give better microstructure, mechanical and tribological properties, and those are tixocasting, rheocasting and selective laser melting. Based on available investigations tixocasting gives promising results, the only drawback is the price and in the future, investigations should be oriented to finding ways for its reduction.

The modification of hypereutectic high-alloy silumins — prospects for the development of technology for producing materials with a low linear expansion coefficient

Hypereutectic Aluminum Alloys and Composites: A Review

Investigation of the Effect of Modifying the AlSi7Mg0.3 Alloy with a Fast-Cooled Master Alloy Using Heat Treatment

Manufacturing Feasibility of All-Aluminum Automotive Engines Via Application of High Silicon Aluminum Alloy

Fabrication of hypereutectic Al Si alloy with improved mechanical and thermal properties by hot extrusion

Microstructure and Mechanical Properties of Hypereutectic Al-High Si Alloys up to 70 wt.% Si-Content Produced from Pre-Alloyed and Blended Powder via Laser Powder Bed Fusion

Production Technology Features for Aluminum Matrix Alloys with a Silicon Carbide Framework

Research Progress on Primary Phase Refinement in Hypereutectic Al-Si Alloys

Influence of Cooling Rate on Primary Silicon Size in Hypereutectic Al–Si Alloy Fabricated by Laser Powder Bed Fusion

New Method of Eutectic Silicon Modification in Cast Al–Si Alloys

Modification Performance of the Al-P Master Alloy for Eutectic and Hypereutectic Al-Si Alloys

Aluminium-Silicon Lightweight Thermal Management Alloys with Controlled Thermal Expansion

A Comparative Study on Microstructure, Mechanical Property and Damping Capacity of Hypoeutectic Al–Si–Cu Alloy for Different Casting Technologies

Effect of Alloying Elements Mg and Cu on the Modification of Eutectic Silicon in Hypoeutectic Al-Si Alloys

Ultrasonic melt processing upon direct-chill casting of aluminium alloys

The effect of squeeze casting process on the microstructure, mechanical properties and wear properties of hypereutectic Al–Si–Cu–Mg alloy

Semi-Solid Slurries for Rheocasting of Hypoeutectic Al-Si-X Alloys Produced by Self-Stirring in Serpentine Channels

Microstructure control and performance evolution of hypereutectic Al–20Mg2Si alloy by novel Al–Ca–Sb master alloy

The Circumstances and Development of Refinement and Modification of Hypoeutectic Al-Si Alloys

Microstructure and Properties of Semi-solid Die Casting of High Silicon Aluminum Alloy with High Thermal Conductivity

A General Formulation of Eutectic Silicon Morphology and Processing History