Abstract:Al-Si alloys have been widely used in electronic information, communication and other fields because of their high specific strength, excellent castability and good thermal conductivity. In recent years, with the rapid development of 5G communication technology, electronic communication equipment is gradually developing towards high integration and lightweight. The power of related equipment is higher and higher, which puts forward higher requirements for thermal conductivity and mechanical properties of materials. Si can improve the fluidity and strength of the Al-Si alloy, but a large amount of Si will aggravate the lattice distortion and promote the increase of eutectic Si. This will reduce the plasticity of the alloy, increase the electron scattering and reduce the thermal conductivity. In order to improve the mechanical properties and thermal conductivity of Al-Si alloys, chemical inoculation is generally used. Sr is usually used as modifier and Al-B is as grain refiner. However, the simultaneous addition of Sr and B in Al-Si alloy results in "poisoning" phenomenon, it is impossible to refine α- Al grains and modified eutectic Si simultaneously. In recent years, rare earth La has attracted more and more attention in improving the properties of aluminum alloys. However, previous studies have mainly focused on the effects of La addition, the effects of combined addition of La, Sr, B on the microstructure and properties of Al-7Si-0.6 Fe alloy is lack. In this work, solidification experiments were performed to investigate the effects of combined addition of La, Sr, B on the microstructure and properties of Al-7Si-0.6 Fe alloy. The results show that the addition of trace rare earth La can effectively eliminate the poisoning effect of Sr and B, and enhance the modification effect of eutectic Si. Besides, La addition can promote the formation of α-Al heterogeneous nucleation substrate LaB6 and La can be used as a surfactant to reduce the undercooling of α-Al nucleation, thus it refines α-Al grains. The thermal conductivity of the alloy is significantly improved when the addition of La ranges from 0.02% to 0.06%, with the further increase of La addition, LaAlSi intermetallic compounds are formed in the alloy, leading to a decrease in the thermal conductivity of the alloy.

Synergistic Effect of Lanthanum and Melt Purification on the Microstructure of Hypereutectic Al–Si Alloy

Effect of strontium and melt purification on the solidification microstructure of hypereutectic Al-Si alloys

Synergistic Effect of Strontium and Melt Quenching on the Solidification Microstructure of Hypereutectic Al-Si Alloys

Super-gravity field assisted homogeneous distribution of sub-micron eutectic Si in Al-Si alloy

Enhancing Silicon Refinement in an Al-25Si Hypereutectic Alloy by High Cooling Rate and La–Ce–Y Modifiers

The Influence of the Combined Addition of La–Ce Mixed Rare Earths and Sr on the Microstructure and Mechanical Properties of AlSi10MnMg Alloy

Growth Mechanism of Eutectic Si in Super-Gravity Solidified Al-Si Alloy During Annealing

Study on the Effect of Pre-Refinement and Heat Treatment on the Microstructure and Properties of Hypoeutectic Al-Si-Mg Alloy

Effect of trace rare earth La on microstructure and properties of Al-7Si-0.6 Fe alloy

Microstructure control and performance evolution of hypereutectic Al–20Mg2Si alloy by novel Al–Ca–Sb master alloy

Effect of rare earth La–Ce on solidification structure of 3.2%Si-0.9%Al non-oriented silicon steel

Effect of Ca Addition on Solidification Microstructure of Hypoeutectic Al-Si Casting Alloys

Effects of Refinement and Modification on Melt Structure of Hypoeutectic Al-Si Alloy

Uncovering the roles of LaB6-nanoparticle inoculant in the AlSi10Mg alloy fabricated via selective laser melting

Solidification microstructure manipulation mechanism of hypoeutectic and hypereutectic Al-Si alloys controlled by trace in-situ nano-Fe 2 B and nano-Fe 3 Si

Tailoring the heterophase interfacial structures to improve both strength and ductility of Al-Li alloys by fine tuning major solute Mg

Synergistic Effect of Sc and Excess Mg on the Microstructure and Mechanical Properties of Hypoeutectic Al-10Mg2Si Alloy

Refinement of Primary Si Phase in Hypereutectic Al–Si Alloy by Electrically Assisted Solidification with P Addition

Effect of minor lanthanum on the microstructures, tensile and electrical properties of Al-Fe alloys

Effect of Rare Earth Dy (dysprosium) on the Microstructures and Mechanical Properties of Hypereutectic Al–Si Alloy

Influence of Alloying Element Mg on Na and Sr Modifying Al-7Si Hypoeutectic Alloy