Abstract:Hypoeutectic Al–Si alloys are becoming increasingly popular in automotive and aerospace engineering fields due to their excellent overall performance, and grain refinement is regarded as an important way to improve casting and mechanical properties. Titanium (Ti) is a basic element for grain refinement; thus, a certain amount of Ti is often included in Al–Si alloys. In the present work, the changes in the grain refinement, mechanical, and casting properties of Al–Si alloys with different Ti concentration levels under various grain refinement conditions were systematically investigated. The specific roles of Ti in the heterogeneous nucleation of α-Al grains were summarized, and the formation mechanism of Ti-rich zones in Al–Si alloys was revealed. Excess Ti concentration could not efficiently reduce the grain size of Al–Si alloys and eventually resulted in inferior mechanical and casting qualities; hence, the recommended Ti concentration level for the aluminum alloy grades of A356 and A357 is ≤ 0.1 wt%. Furthermore, an optimized technique for the grain refinement of hypoeutectic Al–Si alloys was presented. A small amount of an Al–TCB master alloy was introduced to achieve the best grain refinement and mechanical properties in a trace Ti environment. The addition of 0.5 wt% of the Al–TCB master alloy at the Ti concentration level of 0.06 wt% increased the ultimate tensile strength, elongation, and quality index of the Al–7Si–0.45Mg alloy to 328.8 ± 5.0 MPa, 14.4 % ± 0.6 %, and 970.7 ± 33.1 MPa, respectively.

The Circumstances and Development of Refinement and Modification of Hypoeutectic Al-Si Alloys

Study on the Apparent Viscosity and Microstructure of Semi-Solid Al-Si Alloy Prepared by Chemical Refining

Effects of Refinement and Modification on Melt Structure of Hypoeutectic Al-Si Alloy

Research Progress on Primary Phase Refinement in Hypereutectic Al-Si Alloys

Study on the Effect of Pre-Refinement and Heat Treatment on the Microstructure and Properties of Hypoeutectic Al-Si-Mg Alloy

Constitutive relation between electric conductivity and microstructure characteristics parameters of hypoeutectic Al-Si alloys

Research on Refinement of the High-Strength and Ductility Al-Si Alloy

Enhancing Silicon Refinement in an Al-25Si Hypereutectic Alloy by High Cooling Rate and La–Ce–Y Modifiers

Interactions of Melt Processes of Hypoeutectic Al-Si Alloys

Modification Performance of the Al-P Master Alloy for Eutectic and Hypereutectic Al-Si Alloys

In-situ Synthesis of Novel Al-P-O Master Alloy and Its Refinement and Modification Effects on Si Phases in Hypereutectic Al-30Si Alloys

Grain Refining Mechanism of Al-3B Master Alloy on Hypoeutectic Al-Si Alloys

Insights into the dual effects of Ti on the grain refinement and mechanical properties of hypoeutectic Al–Si alloys

Microstructure Refinement Mechanism of Undercooled Cu55Ni45 Alloys

Microstructure control and performance evolution of hypereutectic Al–20Mg2Si alloy by novel Al–Ca–Sb master alloy

Solidification microstructure manipulation mechanism of hypoeutectic and hypereutectic Al-Si alloys controlled by trace in-situ nano-Fe 2 B and nano-Fe 3 Si

Super-gravity field assisted homogeneous distribution of sub-micron eutectic Si in Al-Si alloy

Incubation and Fading of Sr Modification in Hypoeutectic Al-Si Alloys

Microstructural refinement and tensile properties enhancement of Al-10Mg2Si cast alloys by copper addition

Development of Mechanism of Grain Refinement in Aluminum

Regulation on Microstructures and Properties of Hypereutectic Al–3.5Fe–2.5Ni Alloy by Controlled Diffusion Solidification