Abstract:The study focused on improving CO2 electrochemical reduction by enhancing gas‐liquid mixing in a novel reactor. Compared to traditional S‐reactors, the new reactor showed a 12.99% CO2 concentration increase at the electrode and a 67.11% surge at the cathode exit. This led to a 6.37% overall increase in methanol production, suggesting a promising approach for optimizing CO2ERR. The CO2 electrochemical reduction reaction (CO2ERR) is heralded for carbon dioxide and renewable energy utilization. However, complexities in catalyst optimization and reactor structure research hinder its practical application. Herein, rather than traditional catalyst optimization, emphasis is placed on refining the reactor structure to enhance gas–liquid mixing. The goal is to raise the CO2 concentration in the reaction zone and extend its residence refining CO2ERR. Building on prior reactor designs, this work introduces the N‐reactor (the nozzle‐type reactor) with a ring electrode suited for gas–liquid mixing and reaction interplay. Through finite element simulations using the gas–liquid flow model, compared with the S‐reactors (the wide‐straight‐type reactor and the narrow‐straight‐type reactor), the N‐reactor's ring electrode shows a 12.99% CO2 concentration rise in the electrode zone and a 67.11% surge at the cathode exit. As a consequence, the total concentration of the product methanol is increased by 6.37%, with a maximum concentration increase of 26.96% and a concentration increase of 49.08% at the cathode outlet. These results validate the feasibility of optimizing the reaction from the perspective of gas–liquid mixing flow and provide novel methods and ideas for further optimization of CO2ERR, contributing to the practical application of the technology.

Experimental investigation of effective gas-liquid specific interfacial area in a rotor-stator reactor

Experimental and Numerical Simulation on Sequential Three Phase Jet-Loop Reactor

Measuration of Gas-Liquid Interfacial Area in Rotating Drum Reactor by Chemical Method

Study on Hydrodynamics and Mass Transfer Characteristic of a New Gas-liquid Reactor

Modeling of Mass Transfer Characteristics of Bubble Column Reactor with Surfactant Present

Investigation of Effective Interfacial Area in Micropacked Bed Reactors

Experimental Study on Volumetric Mass Transfer Coefficients for CO2 Removel from Polluted Air into Aqueous Solution of NaOH in a Rotating-stream-tray Scrubber

Visual study on the characteristics of liquid and droplet in a novel rotor-stator reactor

Simulation And Experimentation On The Gas Holdup Characteristics Of A Novel Oscillating Airlift Loop Reactor

Micro-interface Enhanced Mass Transfer Sodium Carbonate Absorption Carbon Dioxide Reaction

A convenient method for measuring gas-liquid volumetric mass transfer coefficient in micro reactors

Modeling Investigation of Mass Transfer of Gas–liquid Concurrent Flow Processes

Mass transfer dynamics of single CO 2 bubbles rising in monoethanolamine solutions: Experimental study and mathematical model

Experimental study on gas–liquid interfacial area and mass transfer coefficient in three-phase circulating fluidized beds

CO2 Capture in a Miniaturized Annular Rotating Device with Countercurrent Flow

An experimental investigation of gas-liquid-solid transfer and external wetting efficiency on open-cell foam in a three-phase packed bed reactor: validation and parameter estimation

Gas-Liquid Mass Transfer Characteristics in a Rotating-Drum Bioreactor

Gas-liquid flow and mass transfer characteristics in improved heart-shaped structure microreactor

Structural Optimization of Reactor for the Enhancement of CO2 Electrochemical Reduction Based on Gas–Liquid Mixing Flow Model

Effects of nanoparticles with different wetting abilities on the gas–liquid mass transfer

Modeling on bubble effectiveness in gas-liquid reactor (2) Experimental study on single bubble effectiveness and its applications