Abstract:Co‐current flow is chosen to represent the collective performance of all flow patterns; A trade‐off between the purity of CO2 and the recovery factor is observed; Despite the reduction of purity, a higher amount of CO2 can be recovered with a larger membrane area; A sharp decline in power requirement is observed with increasing selectivity from 2 to 20. Direct air capture (DAC) of CO2 is becoming increasingly important for reducing greenhouse gas concentrations in the atmosphere. However, the cost and energy requirements associated with DAC make it less economically feasible than carbon capture from flue gases. While various methods like solid sorbents and gas–liquid absorption have been explored for DAC, membrane processes have only recently been investigated. The objective of this study is to examine the separation performance of a membrane unit for capturing CO2 from ambient air. The performance of a membrane depends on several factors, including the composition of the feed gas, pressure ratio, material selectivity, and membrane area. The single‐stage separation process with the co‐current flow and constant permeability flux model is evaluated using a commercial module integrated with a process simulator to separate a binary mixture of carbon dioxide and nitrogen to assess the sensitivity of selectivity on purity and recovery of CO2 in permeate, and power requirement. Additionally, three levels of CO2 reduction from the feed stream to the retentate stream (25%, 50%, and 75%) are studied. A trade‐off between purity and recovery factor is observed, and achieving high purity in permeate requires high concentration in the retentate.

CO2 Capture in a Miniaturized Annular Rotating Device with Countercurrent Flow

Gas-liquid Microdispersion and Countercurrent Flow in a Miniaturized Annular Rotating Device

Anion Pillared Metal–Organic Framework Embedded with Molecular Rotors for Size-Selective Capture of CO2 from CH4 and N2

Liquid-liquid Dispersion and Flow Characteristics in a Miniaturized Annular Rotating Device

A 3d Microfluidic Device For Carbon Capture Microcapsules Production

CO 2 capture in a novel rotating spiral contactor with hydraulic seal: Hydromechanics, mass transfer and modeling

Liquid-liquid Flow and Mass Transfer Characteristics in a Miniaturized Annular Centrifugal Device

Deep Deoxidation of Water in a Miniaturized Annular Rotating Device: Experimental Investigation and Machine Learning Modeling

A Radial Flow Contactor for Ambient Air CO2 Capture

Gas–liquid microdispersion and microflow for carbon dioxide absorption and utilization: a review

Modeling of CO2 Mass Transport Across a Hollow Fiber Membrane Reactor Filled with Immobilized Enzyme

Understanding the performance of membrane for direct air capture of CO2

Development of a membrane dispersion micro-absorber for CO 2 capture

Theoretical Approach to CO2 Absorption in Microreactors and Reactor Volume Prediction

Gas-liquid Countercurrent Flow Characteristics in a Microbubble Column Reactor

Experimental investigation of effective gas-liquid specific interfacial area in a rotor-stator reactor

Enhancing CO 2 Absorption with Compact Multiflow Absorber: Evaluation of Operational Factors

Direct air capture with amino acid solvent: Operational optimization using a crossflow air‐liquid contactor

Micro-interface Enhanced Mass Transfer Sodium Carbonate Absorption Carbon Dioxide Reaction

Modeling Investigation of Mass Transfer of Gas–liquid Concurrent Flow Processes

CO2 reduction in a microchannel electrochemical reactor with gas-liquid segmented flow