Abstract:In this work, a coaxial dielectric barrier discharge reactor has been developed for the decomposition of CO2 at atmospheric pressure. The response surface methodology based on a three-factor, three-level Box-Behnken design has been developed to investigate the effects of key independent process parameters (discharge power, feed flow rate, and discharge length) and their interactions on the reaction performance in terms of CO2 conversion and the energy efficiency of the plasma process. Two quadratic polynomial regression models have been established to understand the relationships between the plasma process parameters and the performance of the CO2 conversion process. The results indicate that the discharge power is the most important factor affecting CO2 conversion, while the feed flow rate has the most significant impact on the energy efficiency of the process. The interactions between different plasma process parameters have a very weak effect on the conversion of CO2. However, the interactions of the discharge length with either discharge power or gas flow rate have a significant effect on the energy efficiency of the plasma process. The optimal process performance-CO2 conversion (14.3%) and energy efficiency (8.0%) for the plasma CO2 conversion process is achieved at a discharge power of 15.8 W, a feed flow rate of 41.9 ml.min(-1) and a discharge length of 150 mm as the highest global desirability of 0.816 is obtained at these conditions. The reproducibility of the experimental results successfully demonstrates the feasibility and reliability of the design of experiments approach for the optimization of the plasma CO2 conversion process.

Deep Deoxidation of Water in a Miniaturized Annular Rotating Device: Experimental Investigation and Machine Learning Modeling

Deactivation Kinetic Study on Vapor Phase Beckmann Rearrangement of Cyclohexanone Oxime and Design of the Multi-Layer Inclined Channel Bionic Reactor

Fast Deoxygenation in a Miniaturized Annular Centrifugal Device

CO2 Capture in a Miniaturized Annular Rotating Device with Countercurrent Flow

Liquid-liquid Dispersion and Flow Characteristics in a Miniaturized Annular Rotating Device

Process Optimization for Microcystin-Lr Degradation by Response Surface Methodology and Mechanism Analysis in Gas-Liquid Hybrid Discharge System

Gas-liquid Microdispersion and Countercurrent Flow in a Miniaturized Annular Rotating Device

Liquid-liquid Flow and Mass Transfer Characteristics in a Miniaturized Annular Centrifugal Device

Study on Hydrodynamics and Mass Transfer Characteristic of a New Gas-liquid Reactor

In-situ Investigation and Modeling of Electrochemical Reactions with Simultaneous Oxygen and Hydrogen Microbubble Evolutions in Water Electrolysis

Simulation And Experimentation On The Gas Holdup Characteristics Of A Novel Oscillating Airlift Loop Reactor

Hydrodynamics, Axial Mixing and Mass Transfer in Open Turbine Rotating Disc Contactor (OTRDC)

Optimization of CO2 Conversion in a Cylindrical Dielectric Barrier Discharge Reactor Using Design of Experiments

Microinterface Intensification in Hydrogenation and Air Oxidation Processes

Microbubble-Dominated Mass Transfer Intensification in the Process of Ammonia-Based Flue Gas Desulfurization

Hydrodynamics of a Fast and Highly Exothermic Liquid-Liquid Oxidation Process with In-Situ Gas Production in Microreacto

Experimental investigation of effective gas-liquid specific interfacial area in a rotor-stator reactor

Nitrogen Oxides Removal and Mechanism Research for Dielectric Barrier Discharge with NaCl Solution Grounded Electrode

Modeling and Experimental Study on a Photochemical Microscale Continuous Oscillatory Baffled Reactor

Effect of Mixing on Mass Transfer Characterization in Continuous Slugs and Dispersed Droplets in Biphasic Slug Flow Microreactors

Efficient Nitrogen Removal using a Continuous-Flow Reactor with Double-Layer Alternating Aeration for Treating Municipal Wastewater