Abstract:A dynamic model on high-temperature corrosion with fouling-type ash deposition was established to predict the thickness distribution of corrosion layer and the outer/inner layer of ash deposit. It provides an observation on variation of heat transfer characteristics of the alloy test probe over time. This model involves the combustion characteristics of high-chlorine coal, the process of formation, migration, and deposition of fly ash particles, and the corrosion of alloy test probe. In this study, the dynamic model has been integrated into the numerical simulation of high-chlorine coal combustion in a 50 kW long-period corrosion test furnace. The prediction results show that the amount of fly ash deposition on the windward surface is the most while the least amount appears on the side surface. There is a great correlation between the corrosion layer and the inner layer of ash deposit. Because the inner layer of ash deposit and the alloy substrate are spatially adjacent, the high temperature corrosion process is greatly affected by the growth and property of fly ash deposit layer. The simulation results show that the heat flux of probe surface beneath ash deposit is 2.5 kW/m(2) which is 50% of the clean surface (5 kW/m(2)). The changing pattern of thermal resistance versus time at different positions of the alloy surface is consistent with the variation of thickness of the corrosion layer and ash deposit layer. The windward face has the highest thermal resistance and the least heat flux due to the highest thickness of the corrosion layer and ash deposit layer. With the increase of probe wall temperature, the ratio of thermal resistance of corrosion layer to total heat transfer resistance increases, and the ratio at the side face is larger than that at other locations. And the proportion of the corrosion layer in thermal resistance for alloy TP347H reaches 8% at the probe wall temperature of 973 K. (C) 2021 Energy Institute. Published by Elsevier Ltd. All rights reserved.

Characteristics of Corrosion Related to Ash Deposition on Boiler Heating Surface during Cofiring of Coal and Biomass

Experimental study on ash deposition and corrosion in a CFB boiler co-firing biomass with coal

Characteristics of Ash Deposit and Dew Point Corrosion in Biofuel Boiler

Experimental Study on Dew Point Corrosion Characteristics of the Heating Surface in a 65 T/h Biomass-Fired Circulating Fluidized Bed Boiler

Mechanism of Biomass Ash Fouling and Pit Corrosion in the Low Temperature Surface

Comparative study on ash deposit mechanism and characteristics of eucalyptus bark and bagasse-firing on boiler superheater

Corrosion Behavior of TP316L of Superheater in Biomass Boiler with Simulated Atmosphere and Deposit

Low-Temperature Ash Deposition and Dewpoint Corrosion of A Coal-Fired Travelling Grate Boiler

Recent Development of Corrosion Factors and Coating Applications in Biomass Firing Plants

Dynamic Simulation on High-Temperature Corrosion Behaviour of Tube Surface with Fouling in Utility Boiler Fired by High-Chlorine Coal

Fouling Characteristics of Coal Biomass Co-Combustion and the Influence of the Deposition Surface

Investigation of Ash Deposition Dynamic Process in an Industrial Biomass CFB Boiler Burning High-Alkali and Low-Chlorine Fuel

Ash Deposition Characteristics on Heating Surface in Biomass Circulating Fluidized Bed Boiler

Research on the Dynamic Characteristic of Ash Deposition in Boilers Burning Coal and Coal Water Slurry

Effect of Fouling Layer (Acid–Ash Reaction) on Low-Temperature Corrosion Covering Heating Surface in Coal-Fired Flue Gas

Influence of Ash Characteristics on Ash Deposition in Coal Fired Boiler

High-Temperature Corrosion Properties of Boiler Steels under A Simulated High-Chlorine Coal-Firing Atmosphere

Investigation of Biomass, RDF and Coal Ash-Related Problems: Impact on Metallic Heat Exchanger Surfaces of Boilers

Coupling Mechanism of Dew Point Corrosion and Viscous Ash Deposits

Coupling mechanism of viscose ash deposition and dewpoint corrosion in industrial coal-fired boiler

Formation of Sulfide Deposits and High-Temperature Corrosion Behavior at Fireside in a Coal-Fired Boiler