Abstract:With the evolution of modularization and prefabrication in construction, there is a growing adoption of prefabricated thin-wall steel and aluminum structures for lightweight buildings and interior decoration. Clinching emerges as a proficient method for achieving heterogeneous metal connections, offering benefits such as streamlined processes, reduced material usage, environmental friendliness, and potential for automation. This study focuses on high-strength steel DP590 and aluminum alloy AW5754-H22, exploring various process parameters (including punch diameter, punch fillet radius, extensible die diameter, and extensible die depth) tailored for clinching experiments on thin steel and aluminum plates. The research analyzes how these process parameters affect the geometric characteristics of the joints and investigates their mechanical properties through static shear tests. Findings indicate that interlocks exceeding 0.29 mm lead to neck cracks during the clinching process. Additionally, the energy absorption of the specimens in button separation exceeds that in neck fracture by 44 % under comparable maximum failure loads in static shear. Optimal process parameters identified are SR5605-SR60310, achieving a maximum failure load of 4.14kN and an energy absorption value of 12.37 J in static shear tests. Finally, a method is proposed to calculate the shear strength of steel‐aluminum clinched joints based on the transmission dynamics of infectious diseases model (SIR model), accounting for the influence of geometric parameters on the static performance of the joints. This approach accurately describes the load-displacement curve trend and predicts the static shear strength of steel‐aluminum clinched joints effectively.

Investigation of a renovating process for failure clinched joint to join thin-walled structures

Investigation of the Restored Joint for Aluminum Alloy

Forming Mechanism of the Repairing Process on Clinched Joint

Investigation to enhance the mechanical properties of damaged flat-clinching joints by reconditioning processes

Steel-aluminum Plastic Clinching of an Inclined Wall Die

Comparative Investigation of Auxiliary Processes for Increasing the Strength of Clinched Joints

Investigation of mechanical behavior of the reshaped joints realized with different reshaping forces

Investigation on Strength and Failure Mode of Clinching

Comparative Investigation of Three Different Reforming Processes for Clinched Joint to Increase Joining Strength

Microstructure evolution of AA5052 joint failure process and mechanical performance after reconditioning with tubular rivet

In-situ Solid State Repairing Method for Failure Flat Clinched Joint of Aluminum Alloy

Experimental Investigation On The Joining Of Aluminum Alloy Sheets Using Improved Clinching Process

Experimental Study on the Height-Reduced Joints to Increase the Cross-Tensile Strength

Steel‐aluminum clinched joints mechanical properties and strength prediction under different geometric parameters

Optimization of a Reshaping Rivet to Reduce the Protrusion Height and Increase the Strength of Clinched Joints

Experimental Investigation of the Mechanical Reshaping Process for Joining Aluminum Alloy Sheets with Different Thicknesses

Numerical and Experimental Investigations of the Two-Step Clinching Process with a Bumped Die

Experimental and numerical investigation on the effect of process parameters on joint strength and failure behavior of self-piercing riveted steel/aluminium hybrid joints

Influence of thickness combinations on mechanical properties of joints produced by clinch riveting with rigid rivet

Research on material flow in flat clinching process and joint failure mechanism

Experimental investigation of the novel dieless clinching process free of blank holder