Abstract:With the evolution of modularization and prefabrication in construction, there is a growing adoption of prefabricated thin-wall steel and aluminum structures for lightweight buildings and interior decoration. Clinching emerges as a proficient method for achieving heterogeneous metal connections, offering benefits such as streamlined processes, reduced material usage, environmental friendliness, and potential for automation. This study focuses on high-strength steel DP590 and aluminum alloy AW5754-H22, exploring various process parameters (including punch diameter, punch fillet radius, extensible die diameter, and extensible die depth) tailored for clinching experiments on thin steel and aluminum plates. The research analyzes how these process parameters affect the geometric characteristics of the joints and investigates their mechanical properties through static shear tests. Findings indicate that interlocks exceeding 0.29 mm lead to neck cracks during the clinching process. Additionally, the energy absorption of the specimens in button separation exceeds that in neck fracture by 44 % under comparable maximum failure loads in static shear. Optimal process parameters identified are SR5605-SR60310, achieving a maximum failure load of 4.14kN and an energy absorption value of 12.37 J in static shear tests. Finally, a method is proposed to calculate the shear strength of steel‐aluminum clinched joints based on the transmission dynamics of infectious diseases model (SIR model), accounting for the influence of geometric parameters on the static performance of the joints. This approach accurately describes the load-displacement curve trend and predicts the static shear strength of steel‐aluminum clinched joints effectively.

Research on material flow in flat clinching process and joint failure mechanism

Steel-aluminum Plastic Clinching of an Inclined Wall Die

Effects of sheet thickness and material on the mechanical properties of flat clinched joint

Research on the improvement of flat-clinching jointed aluminum alloy by reshaping process

Failure analysis of single-point butt clinched joint with dissimilar aluminium alloy sheets

Research on mechanical clinching process for dissimilar aluminum alloy sheets with inclined surface

Steel‐aluminum clinched joints mechanical properties and strength prediction under different geometric parameters

Forming Process and Morphology Control of Mechanical Clinch Joint of Steel/Aluminum Sheet

Mechanical characterization of a steel-aluminum clinched joint under impact loading

Research on a single-point butt clinching process with various forming forces

Research on the material flow and joining performance of two-strokes flattening clinched joint

Experimental and numerical investigations into the ductile fracture during the forming of flat-rolled 5083-O aluminum alloy sheet

Investigation of the flat-clinching process for joining three-layer sheets on thin-walled structures

Experimental investigation of the novel dieless clinching process free of blank holder

Influence of sheet thickness on mechanical behaviors of the clinched joints produced by single-point butt clinching process

Influence of thickness combinations on mechanical properties of joints produced by clinch riveting with rigid rivet

Effect of blank holder force on joining quality of the flat clinch-rivet process

Microstructure, Fatigue Properties and Stress Concentration Analysis of 6005 Aluminum Alloy MIG Welded Lap Joint

Investigation of the clinching process with rectangle punch

A Comparative Study of Local Heat Treatment for Enhancing Overall Mechanical Properties of Clinched Joints

Mechanical Performance Evaluation of Multi-Point Clinch–Adhesive Joints of Aluminum Alloy A5052-H34 and High-Strength Steel JSC780