Abstract:With the evolution of modularization and prefabrication in construction, there is a growing adoption of prefabricated thin-wall steel and aluminum structures for lightweight buildings and interior decoration. Clinching emerges as a proficient method for achieving heterogeneous metal connections, offering benefits such as streamlined processes, reduced material usage, environmental friendliness, and potential for automation. This study focuses on high-strength steel DP590 and aluminum alloy AW5754-H22, exploring various process parameters (including punch diameter, punch fillet radius, extensible die diameter, and extensible die depth) tailored for clinching experiments on thin steel and aluminum plates. The research analyzes how these process parameters affect the geometric characteristics of the joints and investigates their mechanical properties through static shear tests. Findings indicate that interlocks exceeding 0.29 mm lead to neck cracks during the clinching process. Additionally, the energy absorption of the specimens in button separation exceeds that in neck fracture by 44 % under comparable maximum failure loads in static shear. Optimal process parameters identified are SR5605-SR60310, achieving a maximum failure load of 4.14kN and an energy absorption value of 12.37 J in static shear tests. Finally, a method is proposed to calculate the shear strength of steel‐aluminum clinched joints based on the transmission dynamics of infectious diseases model (SIR model), accounting for the influence of geometric parameters on the static performance of the joints. This approach accurately describes the load-displacement curve trend and predicts the static shear strength of steel‐aluminum clinched joints effectively.

Investigation of the flat-clinching process for joining three-layer sheets on thin-walled structures

Effects of sheet thickness and material on the mechanical properties of flat clinched joint

Steel-aluminum Plastic Clinching of an Inclined Wall Die

Influence of sheet thickness on mechanical behaviors of the clinched joints produced by single-point butt clinching process

Research on material flow in flat clinching process and joint failure mechanism

Effect of blank holder force on joining quality of the flat clinch-rivet process

Experimental investigation of the novel dieless clinching process free of blank holder

Research on mechanical clinching process for dissimilar aluminum alloy sheets with inclined surface

Experimental and Numerical Study on the Performance of New Prefabricated Connections for Free-Form Grid Structures

Investigation of the clinching process with rectangle punch

Moment Resistance and Flexural Rigidity of Lapped Connections in Multi-Span Cold-Formed Z Purlin Systems

Research on the material flow and joining performance of two-strokes flattening clinched joint

Forming Process and Morphology Control of Mechanical Clinch Joint of Steel/Aluminum Sheet

Research on a single-point butt clinching process with various forming forces

Influence of thickness combinations on mechanical properties of joints produced by clinch riveting with rigid rivet

Joining thin-walled structures without protuberance by two-strokes flattening clinching process

Steel‐aluminum clinched joints mechanical properties and strength prediction under different geometric parameters

Investigation of a renovating process for failure clinched joint to join thin-walled structures

Study on In-Plane Behavior of Thin-walled Concrete-filled Steel Tubular Gusset Plate T-joints

Research on the improvement of flat-clinching jointed aluminum alloy by reshaping process

Experimental Investigation Of Joining The Metal/Polymer/Metal Composite Sheets By Clinching Method