Abstract:Hybrid joints consist of mechanical connections in which both a traditional mechanical joint (i.e. riveting, clinching, welding) and adhesive bonding coexist in order to obtain a better performance if compared with simple bonded or mechanically connected joints. Several literature works demonstrates how hybrid joining allows to improve strength, stiffness and energy absorption in comparison with simple mechanical or bonded connections. In this work the static strength and, more in deep, the fatigue behaviour of clinched, self-piercing riveted, adhesively bonded, clinch-bonded and self-piercing rivet-bonded single lap joint were experimentally investigated for aluminium adherends.It was observed that the static strength of the clinch-bonded and self-piercing rivet bonded joints was essentially due to the adhesive layer, with small decreases due to the reduction of the bonded area related to the presence of the fastened connection.Concerning the fatigue tests, different results were found, in particular it was detected that hybrid joints performed worse than simple joints (especially as regard to the bonded joints) at low number of cycle, while they performed significantly better for high number of cycle.The evolution of the joints damage was monitored by optical observation and by measuring the compliance; it was found that, in the hybrid joints, the presence of the mechanical fastening significantly reduced the crack growth rate in the adhesive layer, with respect to the one of the simple bonded joints, therefore leading to a higher fatigue life.

Research on the Mechanical Properties of Single-Lap Rivet-Bonded Hybrid Joint Considering the Rivet Forming Process

Experimental and numerical investigation on the effect of process parameters on joint strength and failure behavior of self-piercing riveted steel/aluminium hybrid joints

Formation mechanism and mechanical strength evaluation of hybrid riveted/solid-state bonded aluminium alloy joint

Research in failure behaviors of hybrid single lap aluminum-CFRP (plain woven) joints

Study of Mechanical Properties and Failure Mechanism of CFRP-Aluminum Alloy Self-Piercing Riveted-Adhesive Joints

Experimental and numerical investigation into tensile and cross tensile responses of CFRP/Al blind riveted-bonded hybrid joints

Research on the formation mechanism and mechanical properties of refill friction stir riveting (RFSR) joints of aluminium alloy AA7075-T6

Mechanical Properties of B1500HS/AA5052 Joints by Self-Piercing Riveting

Fatigue Behaviors and Mechanism-Based Life Evaluation on SPR-bonded Aluminum Joint

Mechanical properties of tubular rivet-reinforced joints realized with different reinforcing loads

Influence of thickness combinations on mechanical properties of joints produced by clinch riveting with rigid rivet

Effect of Mechanical and Solid-State Joining Characteristics on Tensile-Shear Performance of Friction Self-Piercing Riveted Aluminum Alloy AA7075-T6 Joints

Equivalent characterization of pre-strained material properties and mechanical behavior prediction of steel/aluminum self-piercing riveted joints

Bonding mode and mechanical properties of keyhole-free friction stir rivet welded aluminum alloy joints

Influence of process parameters and heat treatment on self-piercing riveting of high-strength steel and die-casting aluminium

Forming Mechanism of the Repairing Process on Clinched Joint

Fatigue behaviour of hybrid clinch-bonded and self-piercing rivet bonded joints

Numerical and experimental investigation on the load‐bearing performance of plain‐woven composites hybrid bonded‐bolted joints

Investigation on Strength and Failure Mode of Clinching

Numerical modelling and experimental investigation of the Riv-Bonding process

Joint Formation and Mechanical Performance of Friction Self-Piercing Riveted Aluminum Alloy AA7075-T6 Joints