Abstract:<p>The self-piercing riveting (SPR) owns more advantages of acquiring high joint strength for similar and dissimilar metal sheets than the traditional spot welding. However, the conventional SPR may not obtain good joints quality for AA7075-T6 aluminum alloy sheets due to its high strength and low ductility. Thereby the possibility of self-piercing riveting under elevated temperatures makes improving the riveting quality and mechanical behavior has thus been raised as an interesting topic. In this paper, a modified thermal self-piercing riveting (T-SPR) technology for AA7075-T6 sheets was proposed based on the process that the substrate was firstly heated and conducted by the subsequent riveting and heat treatment process. The post-riveted quality and quasi-static mechanical behavior of T-SPR joints under designated temperatures were intrinsically investigated by quantifying the interlocking parameters and the single-lap shear test to assess the optimized riveting temperature. Subsequently, an improved Arcan test was employed to investigate the quasi-static mechanical behavior of cruciform joints under different loading conditions. The failure modes of cross-lap joints were analyzed in detail by combining with experiments and FE simulations coupled with Johnson-Cook (J-C) strength and damage models. The influences of loading angle and loading speed on the mechanical behavior of T-SPR joints were further discussed. The outcomes show that the joinability of T-SPR for AA7075-T6 aluminum alloys can be largely improved by increasing the riveting temperature to 400°C. The loading angle and loading speed also have a significant impact on the mechanical behaviors and failure modes of T-SPR joints under quasi-static loading conditions.</p>

Microstructure evolution of AA5052 joint failure process and mechanical performance after reconditioning with tubular rivet

Mechanical properties of tubular rivet-reinforced joints realized with different reinforcing loads

Investigation on Lightweight Performance of Tubular Rivet-Reinforced Joints for Joining AA5052 Sheets

In-situ Solid State Repairing Method for Failure Flat Clinched Joint of Aluminum Alloy

Investigation of the Restored Joint for Aluminum Alloy

Investigation of a renovating process for failure clinched joint to join thin-walled structures

Influence of thickness combinations on mechanical properties of joints produced by clinch riveting with rigid rivet

The aging characteristics of resistance rivet welded aluminum/steel joints

Joint Formation and Mechanical Performance of Friction Self-Piercing Riveted Aluminum Alloy AA7075-T6 Joints

Investigation to enhance the mechanical properties of damaged flat-clinching joints by reconditioning processes

Formation mechanism and mechanical strength evaluation of hybrid riveted/solid-state bonded aluminium alloy joint

Effect of Mechanical and Solid-State Joining Characteristics on Tensile-Shear Performance of Friction Self-Piercing Riveted Aluminum Alloy AA7075-T6 Joints

Towards joinability of thermal self-piercing riveting for AA7075-T6 aluminum alloy sheets under quasi-static loading conditions

Microstructural Evolution in Friction Self-Piercing Riveted Aluminum Alloy AA7075-T6 Joints

Improving joint performance of friction stir welded 2195-O Al–Li alloy by post-weld heat treatment and rolling deformation

Mechanical Properties of B1500HS/AA5052 Joints by Self-Piercing Riveting

Failure analysis of single-point butt clinched joint with dissimilar aluminium alloy sheets

Comparative Investigation of Three Different Reforming Processes for Clinched Joint to Increase Joining Strength

Fatigue behaviour and life prediction of self-piercing riveted joints in DP590/AA5754 dissimilar sheets

Material-structure-process-performance integrated optimization method of steel/aluminum self-piercing riveted joint

Experimental Investigation of the Mechanical Reshaping Process for Joining Aluminum Alloy Sheets with Different Thicknesses