Abstract:Summary Material properties and geometrical shape of rolled products are two of the most important problems in steel product, which are affected by the thermal distribution and deformation behavior during rolling. Analysis of the behavior of medium plate during multi-pass rolling is significant for guiding the production. Recently years, the finite element method (FEM) has been widely used for analyzing the plate rolling processes, which has become an irreplaceable theory method. Rolling processes is a kind of continuous metal forming technology. Through multi-pass rolling processes, the shape and microstructure of plate could be obtained. However, in mostly works, the researchers focused on analysis of behavior of plates in a single pass, which the deformation of plate in previous passes are neglected. Itis obviousthatmore helpfulmassagescouldbeobtainedtoanalyze the behavior of plate deformation behavior in continuous multi-pass rolling processes. In this paper, a three-dimensional thermal-mechanical finite element model is established for simulation of the continuous deformation behavior of medium plate during multi-pass rolling processes coupled with explicit dynamic FEM, implicit FEM and updating geometrical method. Firstly, establishand solve thethermo-mechanical FE model of the i pass. Then obtain the thermal distribution on plate and obtain the plate shape after the i pass using the updating geometrical method. And establish and solve the thermal distribution of plate between the i pass and the i+1 pass. The thermal distribution in plate, the plate shape, etc, during rolling in the i pass are obtained. Modify the rolls gap and metrical parameters, the FE model of the i+1 pass could be established with the geometrical model and thermal distribution when i < N. With the same method, the following passes could be simulated. The plate view pattern, the thermal distribution, the maximum temperature on slab surface, the minimum temperature on slab surface and the mean temperature on slab surface each pass in the rolling processes were obtained. The calculated results are compared with the actual results, which are in good agreement. The model could be used in the hot working process.

Rolling Process Analysis of Working Rollers of Cold Rolling Mill Based on ANSYS

Analytic Numerical Modeling for Thermal Mechanical Processing of Plate under Rolling

Analytical and Finite Element Analysis of the Rolling Force for the Three-Roller Cylindrical Bending Process

ASR Bending Force Mathematical Model for the Same Width Strip Rolling Campaigns in Hot Rolling

Theoretical Analysis of Rolling Force during Cold Rolling with Roll Crossing and Shifting System

STUDY OF ROLLING FORCE MODEL ON HOT STRIP MILL

Numerical Simulation and Parameter Design of Strip Cold Rolling Process of 301L Stainless Steel in 20-Roll Mill

Tri-dimensional Elastic-Plastic Fem of Rolling Force During Strip Finishing Rolling Process

Novel analytical heat source model for cold rolling based on an energy method and unified yield criterion

FEM simulation of thermo-mechanical stress and thermal fatigue life assessment of high-speed steel work rolls during hot strip rolling process

Numerical simulation of cold longitudinal asymmetric rolling process

Calculation and analysis of rolling force during aluminum alloy thick plate snake/gradient temperature rolling with different roll diameters

Finite Element Analysis of Contact Stresses on the Backup Roll of CVC Hot Rolling Mills

Theoretical Study of Asymmetric Bending Force on Metal Deformation in Cold Rolling

An Efficient Multi-Scale Modeling Method that Reveals Coupled Effects Between Surface Roughness and Roll-Stack Deformation in Cold Sheet Rolling

The central strain analytical modeling and analysis for the plate rolling process

Research on the analytical model of rolling force for TiAl alloy pack rolling

Multi-pass Medium Plate Rolling Processes Using Thermo-mechanical FE Analysis

Numerical Analysis on Flatness Adjusting Performance of Hot Wide Strip Temper Mill with Small-Diameter Work Rolls

Nonlinear Vibration Characteristic Analysis of Roller-Plate System Based on Asymptotic Methods

Machine Learning-Based Generalized Model for Finite Element Analysis of Roll Deflection During the Austenitic Stainless Steel 316L Strip Rolling