Abstract:The central deformation extent of the thick plate can be improved and the approaching uniform deformation will be realized by the snake/gradient temperature rolling (SGTR). At present, the existing rolling force analytical models cannot be directly used for SGTR because of the great difference with the synchronous rolling. The rolling force model should be established so as to meet the production demand of the SGTR with different roll diameters. The thick plate is divided into three layers according to the numerical results of the short-term ultra-fast cooling for the thick plate. The deformation region is simplified into different zones and layers according to the temperature gradient and neutral point position. The traditional von Mises yield criterion was optimized by the introduced coefficients c1 and c2 according to the slip line field theory to correct the deviation caused by the uniform and shear stress assumption. The specific pressure equation is established by the slab method. The deformation region with different composition cases is analyzed, and the rolling force and torque analytical models are established according to the boundary conditions on this basis. The short-term ultra-fast cooling and rolling process were simulated by ANSYS software. The deformation resistance gradient produced by short-term ultra-fast cooling and roll diameter ratio are the main factors to affect the rolling force, while the roll offset has little effect on the rolling force because of its small proportion in the deformation region. The position of neutral points not only affects the rolling torque, but also changes its direction in certain conditions. The model precision was analyzed, and the rolling force calculated by the established analytic model is in good agreement with the numerical method, which serves as a theoretical basis for the rolling mill design and process parameter setting.

Theoretical Analysis of Rolling Force during Cold Rolling with Roll Crossing and Shifting System

Research on the analytical model of rolling force for TiAl alloy pack rolling

Theoretical Study of Asymmetric Bending Force on Metal Deformation in Cold Rolling

Calculation and analysis of rolling force during aluminum alloy thick plate snake/gradient temperature rolling with different roll diameters

A robust model for rolling of thin strip and foil

Rolling force model of V-shaped variable thickness rolling based on energy approach

Research progress and intelligent trend of accurate modeling of rolling force in metal sheet

Novel analytical heat source model for cold rolling based on an energy method and unified yield criterion

Analytical and Finite Element Analysis of the Rolling Force for the Three-Roller Cylindrical Bending Process

Rolling Process Analysis of Working Rollers of Cold Rolling Mill Based on ANSYS

Numerical simulation of cold longitudinal asymmetric rolling process

An analytical model of plate rolling force with a simple available velocity field and equal perimeter yield criterion

Influence of rolling force optimization on thickness accuracy of 20-high cold-rolling mill of silicon steel

Modelling of axial thrust force between rolls in strip mill

An Efficient Multi-Scale Modeling Method that Reveals Coupled Effects Between Surface Roughness and Roll-Stack Deformation in Cold Sheet Rolling

Analytic Numerical Modeling for Thermal Mechanical Processing of Plate under Rolling

The central strain analytical modeling and analysis for the plate rolling process

Variation laws and influencing factors of lateral spread of the cold-rolled thin steel in rolling process

Analysis of the Asymmetrical Rolling of Ultra-Thin Strips Considering Elastic Deformation of the Strips

Deduction of a quadratic velocity field and its application to rolling force of extra-thick plate

Accurate prediction algorithm of rolling force in slab gradient temperature rolling process