Abstract:The wide-width titanium strip cold rolling, as an efficient titanium material processing technology, has been widely concerned. During the cold rolling process, high-order flatness defects occur frequently, seriously restricting the improvement of titanium product quality. To analyze the mechanical deformation behavior of titanium strips during cold rolling, and explore the influence of entrance and exit profile index on the generation of high-order flatness defects. An integrated coupling rolling model of the roll system and the strip has been established based on the FEM method, and the accuracy of the model has been verified using on-site measured data. The research results show that when the taper or coning amount of the first intermediate roll increases, if the entrance profile index remains unchanged, the exit profile index will significantly decrease, and the high-order deflection deformation of the work roll axis will occur, ultimately leading to high-order flatness defects. When using the first intermediate taper roll to control the exit profile index, if the exit profile index remains unchanged, the entrance profile index increases by 10 μm, and the coning amount will increase by 8.3mm. Therefore, a plan based on the optimization of the entrance profile index has been proposed, which takes into account both the profile and the high-order flatness, to achieve a smaller coning amount to meet the exit profile index and decrease the risk of high-order flatness. The industrial test results show that after the implementation of the plan, the occurrence rate of high-order flatness decreased by an average of 34.42%.

Numerical Analysis on Flatness Adjusting Performance of Hot Wide Strip Temper Mill with Small-Diameter Work Rolls

Evolution of Residual Stress Based on Curvature Coupling in Multi-Roll Levelling

Numerical Simulation and Parameter Design of Strip Cold Rolling Process of 301L Stainless Steel in 20-Roll Mill

Research on quarter-wave control in DP980 steel during cold rolling based on multi-pass simulation

Theoretical Study of Asymmetric Bending Force on Metal Deformation in Cold Rolling

Elongation Control of the Ultra-Thin Tinplate During Two-Stand Temper Rolling Unsteady Process

Analysis of flatness and critical crown of hot-rolled strip based on thermal-mechanical coupled residual stress analytical model

Residual stress control of hot-rolled strips during run-out table cooling

Research on the generation and control of high-order flatness during the controlling of titanium strip profile by the intermediate taper roll in a 20-high mill

Study on quarter-wave control of DP980 steel based on a bending force linear combination strategy

Analytical model of hot-rolled strip residual stress and flatness in run-out table cooling

Calculation method and analysis of residual stress in the strip bending roller straightening process

Design of intermediate roll contour and analysis of regulation ability on strip shape of 18-High mill

Analysis of the Asymmetrical Rolling of Ultra-Thin Strips Considering Elastic Deformation of the Strips

ASR Bending Force Mathematical Model for the Same Width Strip Rolling Campaigns in Hot Rolling

Numerical Simulation Research on the Temperature Field and Hot Roll Crown Model of Hot Continuous Rolling Mills

Analytical and Finite Element Analysis of the Rolling Force for the Three-Roller Cylindrical Bending Process

Influence of rolling force optimization on thickness accuracy of 20-high cold-rolling mill of silicon steel

Tri-dimensional Elastic-Plastic Fem of Rolling Force During Strip Finishing Rolling Process

Optimization of Hot Rolling Scheduling of Steel Strip with High Bending Performance

FEM simulation of thermo-mechanical stress and thermal fatigue life assessment of high-speed steel work rolls during hot strip rolling process