Abstract:ZnO thin films were prepared on sapphire (0001) substrates by the dip-coating sol-gel technique. Then, ZnO thin films with thicknesses of 50 nm, 150 nm, 250 nm, and 350 nm were annealed at 800 °C and with thickness of 250 nm were annealed at 600 °C, 700 °C, 800 °C, and 900 °C, respectively. The effect of film thickness and annealing temperature on the structure and optical properties of sol-gel ZnO thin films on sapphire substrates were investigated by XRD, SEM, RT-PL. All the sol-gel ZnO thin films show polycrystalline hexagonal wurtzite structure and a high preferential c-axis orientation. The XRD and SEM results show that the better structural quality, high c-axis preferred orientation, uniform, compact sol-gel ZnO thin films 250 nm thick were obtained when annealed at 700 °C in air. Room-temperature PL spectrum of sol-gel ZnO thin films can be divided into the UV emission and the visible broad band emission. The UV emission can be attributed to the near band edge emission (NBE) and the visible broadband emission can be ascribed to the deep level emissions (DLE). The visible emission is suppressed with the annealing temperature of 600-700 °C. By analyzing our experimental results, we concluded that the deep-level emission corresponds to oxygen vacancies (VO). The biggest ratio of the PL intensity of UV emission to that of visible emission (INBE/IDLE) is observed from sol-gel ZnO thin films 250 nm thick annealed at 700 °C. Therefore, we suggest that film thickness of 250 nm and annealing temperature of 700 °C are the most suitable conditions for obtaining high quality, high c-axis preferred orientation, uniform, compact sol-gel ZnO thin films with good luminescence performance.

Thermal Dissipation Annealing for Crystallization of In‐Doped ZnO Films Deposited on Polyethylene Naphthalate Substrate without Substrate Deformation

Enhanced Visible Light Response of ZnO Porous Thin Film by Post-Annealing Treatment

PHOTO-INDUCED HYDROPHILICITY CONVERSION OF Na-DOPED ZnO THIN FILMS

Preparation and Characterization of Na-doped ZnO Thin Films by Sol–gel Method

Effects of Annealing Temperature on Crystal Quality and Photoelectric Properties of Al-Doped ZnO Thin Film

Annealing Effects on the Microstructure and Photoluminescence Properties of Ni-Doped Zno Films

Study on the Thermal Stability of Ga-doped ZnO Thin Film: A Transparent Conductive Layer for Dye-Sensitized TiO2 Nanoparticles Based Solar Cells

Preparation of highly transparent conductive Al-doped ZnO thin films and annealing effects on properties

Enhanced Electrical Properties of AZO/IZO Multilayered Thin Film with Post Laser Annealing Process

Annealing Treatment on Amorphous InAlZnO Films for Thin-Film Transistors

Effects Of Rapid Thermal Annealing On The Structural, Electrical, And Optical Properties Of Zr-Doped Zno Thin Films Grown By Atomic Layer Deposition

Thermal annealing effect on optical properties of electrodeposited ZnO thin films

Study the characterization of ZnO and AZO films prepared by spray pyrolysis and the effect of annealing temperature

In Situ and Ex Situ Investigation on the Annealing Performance of the Zno Film Grown by Ion Beam Deposition

Effects of AZO film as inductive layer and annealing temperature on microstructure crystallinity and electrical and optical properties of IGZO/SiO2 and IGZO/AZO/SiO2 specimens

Effect of film thickness and annealing temperature on the structural and optical properties of ZnO thin films deposited on sapphire (0001) substrates by sol-gel

ZnGa2O4 polycrystalline thin-film preparation using hydrothermally synthesized nanoparticles

Suppression of Oxygen Vacancy Defects in sALD-ZnO Films Annealed in Different Conditions

Effect of rapid thermal annealing on the properties of zinc tin oxide films prepared by plasma-enhanced atomic layer deposition

Effect of Post-Thermal Annealing on Properties of Zno Thin Film Grown on C-Al(2)O(3)By Metal-Organic Chemical Vapor Deposition

Effects of Annealing on Properties of N-implanted ZnO: Al Thin Films by Sol-gel Technique