Development of a high precision tabletop versatile CNC wire-EDM for making intricate micro parts

Yunn-Shiuan Liao,Shun-Tong Chen,Chang-Sheng Lin

DOI: https://doi.org/10.1088/0960-1317/15/2/001

2004-11-16

Journal of Micromechanics and Microengineering

Abstract:The micro-electrical discharge machining (micro-EDM) process has been proved to be appropriate for making 3D micro parts that are difficult and even impossible to manufacture by other processes. In this paper a high precision tabletop CNC wire electrical discharge machine (wire EDM) designed specifically for machining complex shape micro parts or structures is developed. In the machine developed, a novel micro-wire-cutting mechanism is designed, an approach to control wire tension by magnetic force is proposed and a servo feed control strategy, in accordance with the measured gap voltage, is designed and implemented. To verify the functions and capabilities of the machine developed, several thick micro outer and internal spur gears and rack are machined. It shows that the taper angle along the wall or cavity of a part that appears when other micro-EDM processes are applied can be avoided. A very good dimensional accuracy of 1 µm and a surface finish of Rmax equal to 0.64 µm are achieved. The satisfactory cutting of a miniature 3D pagoda with a micro-hooked structure also reveals that the machine developed is versatile, and can be used as a new tool for making intricate micro parts.

engineering, electrical & electronic,nanoscience & nanotechnology,instruments & instrumentation,physics, applied

What problem does this paper attempt to address?

This paper aims to study the influence of solvent selection on the morphology of the active layer of bulk - heterojunction solar cells fabricated by ink - jet printing. Specifically, the paper explores the roles of different solvents in preparing active - layer films, and how these solvents affect the film formation process, the drying process and their final morphology. In addition, the study also examines the influence of different annealing temperatures on the film properties in order to optimize the photoelectric conversion efficiency of solar cells.

The active materials used in the paper are poly(3 - octylthiophene - 2,5 - diyl) (P3OT) as the electron donor and (6,6) - phenyl C71 butyric acid methyl ester (PC71BM) as the electron acceptor. These materials are dissolved in three different solvents and deposited on indium tin oxide (ITO) - coated glass substrates by ink - jet printing technology. Subsequently, the final active - layer films are obtained by annealing at different temperatures in a vacuum oven to remove the solvents.

The study found that the choice of solvent has a significant impact on the quality of the film. In particular, the physical properties of the solvent, such as vapor pressure, boiling point and surface tension, have a direct relationship with the uniformity and morphology of the film. Through comparative experiments, the author found that the film prepared using a dichlorobenzene/m - terphenyl mixed solvent (2:1) has the best uniformity and reliability. Meanwhile, annealing treatment at 140 °C for 60 minutes can effectively remove the solvent, but it will also increase the surface roughness of the film.

The photoelectric properties of solar cells prepared under different conditions were studied by current - voltage measurement. The results show that appropriate solvent selection and annealing conditions can significantly improve the open - circuit voltage and fill factor of solar cells, although the overall photoelectric conversion efficiency is still low. This is mainly due to the fact that the residual solvent in the active layer reduces the conductivity of the film, and the high surface roughness caused by the不理想 of the film microstructure.