Experimental study of EDM milling of 3D-shaped diffuser for film cooling holes on turbine blades
Jian WANG,Qiang GAO,Xue-Cheng XI,Wan-Sheng ZHAO
DOI: https://doi.org/10.1016/j.procir.2022.09.125
2022-01-01
Procedia CIRP
Abstract:Cylindrical and diffuser-shaped film cooling holes on aero-engine turbine blades are usually machined by electrical discharge machining (EDM) by means of drilling and die-sinking approaches in a sequence. However, this sequential machining on different types of EDM machines is prone to deteriorate the machining accuracy since the inevitable secondary clamping error. Besides, since the nature of electrode wear, the shape of the tip of tool electrode is constantly changing during machining. To ensure the geometry accuracy of the diffuser, the worn tool electrode has to be replaced or dressed online frequently, resulting in a low machining efficiency. To address these problems, this paper proposes a machining method for diffuser shaped film cooling holes by a compound approach in combination of high speed EDM drilling and milling implemented on an EDM drilling machine with tubular electrodes and high-pressure inner flush. To obtain the optimal machining parameters, experimental investigation is carried out based on the experimental design method. Machining performance in terms of longitudinal tool electrode wear ratio, machining time, and machining stability under different machining parameters, such as pulse duration, pulse interval, peak current, capacitance, spindle speed, and flushing pressure, were taken into account. And the range analysis method is then adopted to obtain an optimal set of machining parameters. By applying the obtained optimal machining parameters, the proper compensation parameter and tool path overlapping ratio of the EDM milling process can be obtained. In the milling of an inversed pyramid, the material removal rate can reach as high as 14.02 mm3/min, the relative geometrical error can be controlled within 3.58%, and the maximum recast layer thickness was 6.8μm. Machining experiments of diffuser shaped film cooling holes verify the capability and effectiveness of the proposed method.