Abstract:Micro wire electrical discharge machining (micro-WEDM) provides a promising alternative for micro gear machining. However, the processing defect of non-intact tooth profile often appears due to the influence of micro gear gravity, flushing force and explosive force in micro-WEDM process. This paper presents a process change of micro-WEDM to achieve the precise fabrication of micro gear with intact tooth profile, i.e. firstly reserving a sharp corner on the gear teeth where the processing defect exists and then removing it by the second processing of micro-WEDM. The locating and clamping of the micro gear with sharp corner has been achieved using a novel self-centering flexible fixture. The machining error during the second processing is analyzed, and whilst the process datum is accurately determined. Appropriate processing parameters are obtained by performing preliminary experiments on X153CrMoV12 workpiece, indicating that high open voltage and discharge capacitance cause large kerf width, moderate reference voltage and feed rate lead to narrow kerf width. The static contact between the core jig of the fixture and the micro gear with sharp corner is theoretically analyzed using ABAQUS software and experimentally proved to be in good condition. To verify the feasibility and repeatability of the proposed approach, five micro gears with 10 gear number, 0.1mm module and 2mm tooth width are machined using 50μm diameter wire electrode, exhibiting excellent conformity, machining error with less than 1.5μm and surface roughness Ra with 0.9μm.

Helical Surface Creation by Wire Electrical Discharge Machining for Micro Tools

Complex Rotary Structures Machined By Micro-Wedm

Study on the Preparation Process for High Accuracy Micro Machining by Wire Electrical Discharge Machining

Vibration Assisted High-Speed Wire Electric Discharge Machining for Machining Surface Microgrooves

Study on Micro-Machining by Micro-Wedm

Study on Microrotating Structure Using Microwire Electrical Discharge Machining

A study on wire electrochemical micromachining for fabrication of microgrooves

Fast generation of micro structured surface by applying PCD tools in micro turning

Development of a six-axis wire electrical discharge machine for the fabrication of micro end mills

Fabrication of Micro Gear with Intact Tooth Profile by Micro Wire Electrical Discharge Machining

Wire electro-discharge grinding (WEDG) and its application

Fabrication of Micro-Rotating Structure by Micro Reciprocated Wire-Edm

Design and Development of a Micro Polycrystalline Diamond Ball End Mill for Micro/nano Freeform Machining of Hard and Brittle Materials

Development of Micro Wire Electrical Discharge Machining Platform and Its Application

Development and Experimental Study of MWEDM Prototype

Development of a high precision tabletop versatile CNC wire-EDM for making intricate micro parts

A Micro Die Fabrication Method By Using Mwedm

Research on Geometric Constraint Strategies for Controlling the Diameter of Micro−Shafts Manufactured via Wire Electric Discharge Grinding

Wire Electrochemical Machining with Pulsating Radial Electrolyte Supply and Preparation of Its Tube Electrode with Micro-Holes

Precision machining of high aspect-ratio rotational part with wire electro discharge machining

Desktop Micro-EDM System for High-Aspect Ratio Micro-Hole Drilling in Tungsten Cemented Carbide by Cut-Side Micro-Tool