Abstract:To elucidate the thermofluid reacting environment and thermal stress inside a solid oxide fuel cell (SOFC), a three-dimensional SOFC model is implemented by using the finite element method in the commercial software COMSOL Multiphysics®, which contains both a geometric model of the full-cell structure and a mathematical model. The mathematical model describes heat and mass transfer, electrochemical reactions, internal reforming reactions, and mechanical behaviors that occur within the cell. A parameter study is performed focusing on the inlet fuel composition, where humidified hydrogen and methane syngas (the steam-to-carbon ratio is 3) as well as the local distribution of temperature, velocity, gas concentrations, and thermal stress are predicted and presented. The simulated results show that the fuel inlet composition has a significant effect on the temperature and gas concentration distributions. The high-temperature zone of the hydrogen-fueled SOFC is located at the central part of units 5, 6, and 7, and the maximum value is about 44 K higher than that of methane syngas-fueled SOFC. The methane-reforming and electrochemical reactions in the anode active layer result in a significant concentration gradient between the anode support layer and the active layer of the methane syngas-fueled SOFC. It is also found that the thermal stress distributions of different fuel inlet compositions are rather different. The maximum stress variation gradient between electrode layers of hydrogen SOFC is larger (44.2 MPa) than that of methanol syngas SOFC (14.1 MPa), but the remaining components have a more uniform stress distribution. In addition, the electrode layer of each fuel SOFC produces a significant stress gradient in the y-axis direction, and stress extremes appear in the corner regions where adjacent assembly components are in contact.

Numerical simulation and thermal stress analysis of direct internal reforming SOFCs

Numerical Model of Direct Internal Reforming SOFC: A Comparison between Anode-Support and Metal-Support

Solid Oxide Electrolysis Cell under Real Fluctuating Power Supply with a Focus on Thermal Stress Analysis

Numerical Simulation and Optimization of Operating and Structural Parameters for Solid Oxide Fuel Cell

Numerical Investigation of Heat/Flow Transfer and Thermal Stress in an Anode-Supported Planar SOFC

Towards Feasible Temperature Management and Thermo-Mechanical Stability of Carbon-Assisted Solid Oxide Electrolysis Cell

Numerical Analysis of the Internal Fuel Processing in Solid Oxide Fuel Cells

Fine three-dimensional simulation of the heterogeneous anode of a solid oxide fuel cell with direct internal reforming

Electrochemical Properties and Thermal Neutral State of Solid Oxide Fuel Cells with Direct Internal Reforming of Methane

Simulation and Analysis of Thermal Stress and Sintering Warpage of Planar Solid Oxide Fuel Cells

A Numerical Investigation of the Thermal Stresses of a Planar Solid Oxide Fuel Cell

Thermal Shock Resistance and Failure Probability Analysis on Solid Oxide Electrolyte Direct Flame Fuel Cells

Numerical research on carbon activity, fuel utilization, chemical reaction, and temperature distribution for IT single planar SOFC

Numerical Simulation of an Internal Reforming Solid Oxide Fuel Cell Unit Fueled with Hydrogen-Natural Gas Mixtures

Three-dimensional numerical investigation on the effect of interconnect design on the performance of internal reforming planar solid oxide fuel cell

Modeling and evaluating of thermo-electro-chemo-mechanical behavior for pre-reformed methane-fueled solid oxide fuel cell

Effects of Methane Pre-Reforming Percentage and Flow Arrangement on the Distribution of Temperature and Thermal Stress in Solid Oxide Fuel Cell

Coupling deep learning and multi-objective genetic algorithms to achieve high performance and durability of direct internal reforming solid oxide fuel cell

Influence of Interface Morphology on the Thermal Stress Distribution of SOFC under Inhomogeneous Temperature Field

Effects of methane steam reforming on the mechanical stability of solid oxide fuel cell stack

Analysis on temperature uniformity in methane-rich internal reforming solid oxide fuel cells (SOFCs)