Analysis on temperature uniformity in methane-rich internal reforming solid oxide fuel cells (SOFCs)

Chen Lin,Florian Kerscher,Stephan Herrmann,Benjamin Steinrücken,Hartmut Spliethoff

DOI: https://doi.org/10.1016/j.ijhydene.2024.01.071

IF: 7.2

2024-01-18

International Journal of Hydrogen Energy

Abstract:Temperature uniformity is a critical parameter in solid oxide fuel cells (SOFCs) since it directly impacts thermal stress, material degradation and output performance. Effective thermal management typically aims to achieve a minimal temperature gradient, especially within a SOFC stack assembled by numerous single cells. In this study, numerical simulations of various boundary conditions and cell designs are performed to investigate thermal uniformity in methane-rich internal reforming SOFCs, which can be utilized as a guidance for design and operation in practical application. The results indicate that the fuel gas with a 5 % mole fraction of methane is more effective in enhancing thermal uniformity through reforming cooling effect at the electrolyte compared to only a 1 % mole fraction. It is strongly recommended in cell design to maintain the ratio of the cell's length to its width ( R cell ) greater than or equal to 1.0 considering its better thermal uniformity. However, both increasing the ratio of channel width to rib width ( R c-r ) and decreasing the ratio of channel height to channel width ( R H-W ) have been demonstrated to deteriorate temperature uniformity. Within this study, increasing the backpressure to 1.5 bar is found to result in a 16.7 % reduction in the maximum temperature difference across the electrolyte when compared to that at atmospheric pressure. It is also advisable to operate at the inlet temperature ranging from 973 K to 1023 K for a more uniform temperature distribution within the SOFC.

energy & fuels,electrochemistry,chemistry, physical