Abstract:Abstract TOPCon (tunnel oxide passivated contact) solar cell is the mainstream high‐efficiency crystalline silicon solar cell structure. However, the lack of efficient passivation contact mechanisms on the front surface restricts the electrical performance ability to improve further. Selective emitter (SE) technology, considered a potential solution, needs to be more mature. This work provides a unique thermal pre‐diffusion approach combined with laser treatment and post‐oxidation annealing to create SE structures in TOPCon solar cells. Times for the high‐temperature process are equivalent to those for a traditional homogenous emitter. The innovative thermal pre‐diffusion process created a unique boron doping profile, achieving a high surface concentration of nearly 1 × 10 20 cm −3 with a shallow junction depth of approximately 0.25 μm. Laser treatment further activated boron and facilitated its diffusion, influenced by the boron silicate glass layer and surface boron atoms. Adjustments were made to improve the pre‐diffusion recipe, including an additional boron deposition step, increasing non‐activated boron atoms. Introducing larger pyramidal microstructures also improved the junction depth and surface concentration in the heavily doped region. Compared to homogeneous emitters, the SE structures exhibited lower surface concentration in the lightly doped region, reducing the recombination current density in the passivation region J 0,pass values. The SE structures achieved higher junction depths, limiting metal atom diffusion and reducing the current recombination density in the metal contact region J 0,metal values. The contact resistivity between metal and silicon was also decreased. Overall, introducing SE structures resulted in a batch‐average efficiency improvement of 0.26%, reaching an average efficiency of 25.22% for TOPCon solar cells, and has industrial mass‐producible.

Crystalline silicon solar cells with high resistivity emitter

Crystalline Silicon Heterojunction Solar Cell with 81.6% Fill Factor, Deposited by Physical Vapour Deposition Methods Only

Study on the Front Contact Mechanism of Screen-Printed Multi-Crystalline Silicon Solar Cells

Mass production of high efficiency selective emitter crystalline silicon solar cells employing phosphorus ink technology

Study on selective emitter fabrication through an innovative pre‐diffusion process for enhanced efficiency in TOPCon solar cells

Interface Modeling Between the Printed Thick-Film Silver Paste and Emitter for Crystalline Silicon Solar Cells

Simple integral screenprinting process for selective emitter polycrystalline silicon solar cells

Presented at the 31st European PV Solar Energy Conference and Exhibition, 14-18 September 2015, Hamburg, Germany OPTIMIZATION OF BBr3 DIFFUSION PROCESSES FOR N-TYPE SILICON SOLAR CELLS

Carrier-selective contacts for Si solar cells

Modeling the potential of screen printed front junction CZ silicon solar cell with tunnel oxide passivated back contact

Boron-Doped PECVD Silicon Oxides as Diffusion Sources for Simplified High-Efficiency Solar Cell Fabrication

N+ Emitters Realized Using Ammonium Dihydrogen Phosphate for Silicon Solar Cells

Optimized Phosphorus Diffusion Process and Performance Improvement of C-Si Solar Cell by Eliminating SiP Precipitates in the Emitter

A contactless method of emitter sheet resistance measurement for silicon wafers

Chromium Trioxide Hole-Selective Heterocontacts for Silicon Solar Cells

On the Question of the Possibility of Using Nanocrystalline Porous Silicon in Silicon-Based Solar Cells

Solution‐Processed Electron‐Selective Contacts Enabling 21.8% Efficiency Crystalline Silicon Solar Cells

Emitter formation with boron diffusion from PECVD deposited boron-doped silicon oxide for high-efficiency TOPCon solar cells

Characterization of PIII textured industrial multicrystalline silicon solar cells

Analysis of Silicon Solar Cells With Poly-Si/SiOx Carrier-Selective Base and Emitter Contacts

Characterization of nanoporous silicon layer to reduce the optical losses of crystalline silicon solar cells