Abstract:MC-Si is the most widely used material for making solar PV cells. In spite of the considerable research on improving the conversion efficiency of MC-Si solar PV cells still it remains well within the range of 15-20%. Optical reflectance being the major loss of incident solar energy, efforts are being made to reduce the optical reflectance of solar cell surfaces. Among the several methods proposed, creation of well-defined surface topography on the cell surface remains a promising option. Micro/nano level features with various dimensions and distributions have been created on MC-Si crystal surfaces using a femto-second pulsed laser and the influence of surface topography on optical reflectance in the incident light wave length of 350 – 1000 nm have been studied and compared with the simulation results obtained using OPAL2 software. Experimental results indicate that surface textures on the wafer surface lead to the reduction of optical reflectance in the range of 20-35% in comparison with plain surface. Width of micro grooves have less significant effect on the optical reflectance in comparison with pitch between the micro grooves. Best reduction in reflectance is exhibited by the texture having a groove width of 30 mm and a pitch of 100 mm. A post texturing etching operation is found to have detrimental effect on the ability of micro/nano level features in decreasing the optical reflectance in the preferred wavelength of solar spectrum due to the flattening of nano level features created within the micro grooves due to laser texturing.

Characterization of PIII textured industrial multicrystalline silicon solar cells

Improvement of conversion efficiency of multicrystalline silicon solar cells by incorporating reactive ion etching texturing

Realization of Improved Efficiency on Nanostructured Multicrystalline Silicon Solar Cells for Mass Production

Controllable Nanoscale Inverted Pyramids for Highly Efficient Quasi-Omnidirectional Crystalline Silicon Solar Cells.

High-Efficiency Silicon Inverted Pyramid-Based Passivated Emitter and Rear Cells

Ultrathin Bifacial Passivated Emitter and Rear Cell with Inverted Pyramid Textures

Investigations on the Influence of Surface Textures on Optical Reflectance of Multi-crystalline Silicone (MC-Si) Crystal Surfaces-Simulations and Experiments

Improving the Blue Response and Efficiency of Multicrystalline Silicon Solar Cells by Surface Nanotexturing

A high efficiency industrial polysilicon solar cell with a honeycomb-like surface fabricated by wet etching using a photoresist mask

Conversion Efficiency Enhancement of Multi-Crystalline Si Solar Cells by Using A Micro-Structured Junction

Realization of 13.6% Efficiency on 20 μm Thick Si/Organic Hybrid Heterojunction Solar Cells via Advanced Nanotexturing and Surface Recombination Suppression

Antireflection Properties and Solar Cell Application of Silicon Nanostructures

A simple method to produce dual-scale silicon surfaces for solar cells

Texturization of Cast Multicrystalline Silicon for Solar Cells

Nanostructural Optimization Of Silicon/Pedot: Pss Hybrid Solar Cells For Performance Improvement

Enhanced efficiency of graphene-silicon Schottky junction solar cell through inverted pyramid arrays texturation

Small Pyramidal Textured Ultrathin Crystalline Silicon Solar Cells with Double-Layer Passivation.

Inverted Pyramid Morphology Control by Acid Modification and Application for PERC Solar Cells

STUDY ON MICROCRYSTALLINE SILICON THIN FILM SOLAR CELLS ON FLEXIBLE SUBSTRATE

Smooth anti-reflective three-dimensional textures for liquid-phase crystallized silicon thin-film solar cells on glass

Micro-textures for Efficient Light Trapping and Improved Electrical Performance in Thin-Film Nanocrystalline Silicon Solar Cells