Abstract:Here, a rapid, low-temperature yet effective micro-inverted structuring of silicon (Si) via a low thermal budget copper catalyzed chemical etching (CuCCE) has been demonstrated for efficient hybrid heterojunction solar cells (HSCs) based on poly (3,4-ethylenedioxythiophene): poly(styrene sulfonate) (PEDOT:PSS)/Si in the basic device design 'Ag/PEDOT:PSS/n-Si/In:Ga'. The inverted pyramidal (IP) arrays have been obtained on a large area of the partially polished (PP) Si surface by the CuCCE in etch bath consisting of Cu(NO 3 ) 2 /HF/ H 2 O 2 in 100 mM:4.5 M:1.5 M at room temperature (30 °C). The IP-Si shows significantly reduced total surface reflectance ( 30 %) for broad spectral range. The high efficiency device on the interconnected IP-Si surface shows power conversion efficiency (PCE) >10.75 % which is direct enhancement of ∼4 folds (absolute) when compared with the HSCs made on the PP-Si surface. Such high efficiency HSCs employing the CuCCE based inverted structured solar grade Si surface and detailed analyses of PEDOT:PSS/Si interface have rarely been addressed. The junction property has been studied with the help of Nyquist plots and Mott-Schottky (C-V) analyses of impedance sepctroscopy. A direct 2.9 fold enhancement in the recombination resistance along with high barrier potential found for the optimized IP-Si structured HSCs facilitated the improved junction and minimum recombination at the PEDOT:PSS/n-Si interface. The enhanced PCE is primarily attributed to improved light harvesting ability of the IP-Si surface, junction and passivation properties with conformal coverage of the PEDOT:PSS layer. The study will help to explore the high potential of the CuCCE based IP-Si surfaces for future high efficiency devices.

Enhanced efficiency of graphene-silicon Schottky junction solar cell through inverted pyramid arrays texturation

Efficient Inverted Polymer Solar Cells with Directly Patterned Active Layer and Silver Back Grating

Performance Improvement of Graphene/Silicon Solar Cells via Inverted Pyramid Texturation Array

Silicon Nanocrystal Conjugated Polymer Hybrid Solar Cells with Improved Performance

Nanostructural Optimization of Silicon/pedot:Pss Hybrid Solar Cells for Performance Improvement

Improved performance of GaAs-based micro-solar cell with novel polyimide/SiO 2 /TiAu/SiO 2 structure

Design and Photovoltaic Properties of Graphene/Silicon Solar Cell

Fabrication of 20.19% Efficient Single-Crystalline Silicon Solar Cell with Inverted Pyramid Microstructure

Enhanced Photovoltaic Performance of Inverted Pyramid-Based Nanostructured Black-Silicon Solar Cells Passivated by an Atomic-Layer-Deposited Al2o3 Layer

Monolayer Graphene Film/Silicon Nanowire Array Schottky Junction Solar Cells

Application of Silicon Nanocrystals in Solar Cells

Pyramid‐Textured Antireflective Silicon Surface In Graphene Oxide/Single‐Wall Carbon Nanotube–Silicon Heterojunction Solar Cells

Improvement of conversion efficiency of multicrystalline silicon solar cells by incorporating reactive ion etching texturing

High-Efficiency Silicon Inverted Pyramid-Based Passivated Emitter and Rear Cells

Interface Engineering of Graphene-Silicon Heterojunction Solar Cells

Rapid and low temperature micro inverted pyramid texturing of silicon via copper catalyzed chemical etching for high efficiency PEDOT:PSS/silicon hybrid solar cells

Illumination-Induced Hole Doping for Performance Improvement of Graphene/n-Silicon Solar Cells with P3HT Interlayer

Antireflection Properties and Solar Cell Application of Silicon Nanostructures

Graphene Coupled with Pt Cubic Nanoparticles for High Performance, Air-Stable Graphene-Silicon Solar Cells

Efficiency improvement of silicon nanostructure-based solar cells

An 8.68% Efficiency Chemically-Doped-free Graphene-Silicon Solar Cell Using Silver Nanowires Network Buried Contacts.