Abstract:High efficiency thin-film silicon (Si) solar cells were prepared on flexible substrates by the plasma-enhanced chemical vapor deposition method. To improve their performance, the microstructural, electrical, and optical properties of the core component layers including the metal rear reflectors, p- and n-type doped layers, and intrinsic absorber layers were controlled sophistically. To enable the use of flexible substrates with low heat resistance as well as to enhance light-scattering properties, nanotextured rear reflectors with a Ag/Al:Si bilayer structure were developed by dc magnetron sputtering at a low substrate temperature of below 150 degrees C. Highly crystalline n-doped seed layers (which effectively eliminate a defect-dense amorphous region formed in the initial growth stage of intrinsic nanocrystalline silicon (nc-Si:H) absorber layers) and p-type wide-bandgap nanocrystalline silicon carbide (nc-SiC:H) window layers (which reduce the parasitic absorption loss in the short wavelength region and increase the open circuit voltage (Voc)) were successfully applied to enhance the performance characteristics of the solar cells. Through the combination of the developed core component layers, high conversion efficiencies of 8.84% (V-oc = 0.53 V, J(sc) = 25.28 mA/cm(2), and fill factor (FF) = 0.66, where J(sc) is the short circuit current) and 7.48% (V-oc = 0.50 V, J(sc) = 21.07 mA/cm(2), and FF = 0.71) were obtained for nc-Si:H solar cells fabricated on stainless steel (SUS) and polyimide substrates, respectively, at a low substrate temperature of below 150 degrees C. Flexible a-Si:H/nc-Si:H double-junction solar cells fabricated on SUS substrates showed a high conversion efficiency of 11.46% (V-oc = 1.38 V, J(sc) = 11.53 mA/cm(2), and FF = 032) when the nc-Si:H solar cells developed in this study were applied as a bottom cell.

Efficiency improvement of silicon nanostructure-based solar cells

Efficient Inverted Polymer Solar Cells with Directly Patterned Active Layer and Silver Back Grating

Formation of Nanostructured Emitter for Silicon Solar Cells Using Catalytic Silver Nanoparticles

Silicon Nanocrystal Conjugated Polymer Hybrid Solar Cells with Improved Performance

The 18.3% Silicon Solar Cells with Nano-Structured Surface and Rear Emitter

Improved Efficiency of Silicon Nanoholes/Gold Nanoparticles/Organic Hybrid Solar Cells via Localized Surface Plasmon Resonance

Nanostructural Optimization Of Silicon/Pedot: Pss Hybrid Solar Cells For Performance Improvement

Efficiency Improvement of Flexible A-Sige:H Solar Cells Decorated by Sinx Composite Nanostructures

Silicon-nanocrystal-incorporated Ternary Hybrid Solar Cells

Remarkable enhancement of power conversion efficiency of silicon photovoltaic cell overlaying with novel metallic-polymer nanocomposites utilising immersion technique

Enhanced Light Absorption of Ultrathin Crystalline Silicon Solar Cells Via the Design of Front Nanostructured Silicon Nitride

Realization of 13.6% Efficiency on 20 μm Thick Si/Organic Hybrid Heterojunction Solar Cells via Advanced Nanotexturing and Surface Recombination Suppression

Nanocrystalline‐silicon hole contact layers enabling efficiency improvement of silicon heterojunction solar cells: Impact of nanostructure evolution on solar cell performance

Nanoporous black multi-crystalline silicon solar cells: Realization of low reflectance and explanation of high recombination loss

Performance Enhancement of Thin-Film Silicon Solar Cells by Development of Core Component Layers

A 12%-efficient upgraded metallurgical grade silicon-organic heterojunction solar cell achieved by a self-purifying process.

Enhancing Si-nanowire solar cell performance through fabrication and annealing optimization

Performance of Silicon Nanowire Solar Cells with Phosphorus-Diffused Emitters

Surface Texturing of Silicon Wafers by Two-step Ag-assisted Etching Process with New NSR Solution

High-efficiency CNT-Si Solar Cells Based on a Collaborative System Enabled by Oxide Penetration

Enhanced Device Performance of Si Nanowires/si Nanocrystals Heterojunction Solar Cells with Ultrathin Al2O3 Passivation