Study on the Front Contact Mechanism of Screen-Printed Multi-Crystalline Silicon Solar Cells

Shiliang Wu,Li,Wei Wang,Dong Yu,Wenchao Liu,Xiaoshan Wu,Fengming Zhang
DOI: https://doi.org/10.1016/j.solmat.2015.05.012
IF: 6.9
2015-01-01
Solar Energy Materials and Solar Cells
Abstract:The two key issues of front contact of screen-printed multi-crystalline silicon have been studied. Firstly, the effects of doping profiles in the emitter on the contact-resistance have been systematically investigated. Constant source diffusion is used to explain the doped phosphorus profile in the textured emitter by simulation. Secondly, the penetration mechanism of silver into SiNx layer was studied by using SEM and EDX to reveal the microstructure of the Ag/Si contact. A model has been proposed to explain the formation of the ohmic contact. It is found that the effectiveness of the contact is determined by the direct contact area of the silver crystallites to both the emitter and the finger. For a commercial multi-crystalline silicon solar cell of 156×156mm2, the optimal contact-resistance of about 1.2mΩ is suggested, corresponding to the doping sheet resistance of around 80–90Ω/□. Multi-crystalline Si solar cells with excellent results, up to 18.51% in conversion efficiency, have been achieved. Moreover, to further understand the model, effects of the firing temperature and the thickness of SiNx layer on the contact-resistance have been investigated in the solar cells. It is proved that the formation of the silver crystallites is related to the existence of SiNx layer.
What problem does this paper attempt to address?