Abstract:The mechanical behavior of ceramic–metal (WC-Co) composites at small specimen level is subject to significant uncertainty due to the random assembly of (1) its constituent phases, (2) the crystal orientation of the WC grains, (3) the intrinsic residual stresses, and (4) the variable level of confinement of the metallic binder, within the contiguous network of much stiffer WC grains. In the existing literature, a Weibull distribution of strength is typically assumed at large specimen level. However, it is unknown whether this assumption can be carried over to small samples. Thus, the aim of this study is to shed light into the randomness in the mechanical strength of WC-Co composites, by using Monte Carlo simulations employing Latin Hypercube Sampling. The marginal distribution of the model parameters is assumed to be a grafted zero-threshold Weibull-Gaussian probability distribution, applied individually to the ceramic particles and the metallic binder using autocorrelation fields. The deterministic models are the recently calibrated microplane models M7WC and MPJ2 for the ceramic phase (WC) and the metallic matrix (Co) respectively. Test data in the form of strength histograms, gathered from literature on tensile tests conducted on nanowires of WC-Co composites, are used to calibrate the Weibull and Gaussian parameters, the grafting point locations and the autocorrelation lengths. The deterministic models M7WC and MPJ2 are assumed to be predictive in this study, as they were already calibrated in a previously published work by the authors. The finite element meshes used in the Monte Carlo simulations are generated using real tomography images, which easily captures the Gaussian part of the probability density function (pdf) without any random variables. This approach is shown to account successfully for the randomness observed in the strength of these ceramic–metal composites. Predictions are made for the strength distribution of differently sized nanowire specimens in tension.

Metal-ceramic materials. Study and prediction of effective mechanical properties

The Influence of the Volume Fraction of Ceramic Particles on the Plastic Strain Localization and Fracture of Metal Matrix Composites. Computational Analysis

Numerical Study of the Influence of Residual Thermal Stresses on the Fracture of Metal Matrix Composites

Influence of Features of Interphase Boundaries on Mechanical Properties and Fracture Pattern in Metal–Ceramic Composites

Numerical Simulations of the Dynamic Compressive Properties of Ceramic Particle Reinforced Metal Matrix Composites

An elastic-plastic cohesive zone model for metal-ceramic interfaces at finite deformations

On the dependence of effective mechanical properties of ceramics on partial concentrations of different size pores in its structure

Predicting Micro-Mechanics Damage Behaviour at a Metal-Ceramic Interface in a Reinforced Alloy

Computational extreme value statistics of strength for WC-Co composites at small specimens

Theoretical method for calculation of effective properties of composite materials with reconfigurable microstructure: electric and magnetic phenomena

Localization of deformation and formation of residual stresses in metal-matrix composites

Prediction and Experimental Evaluation of Mechanical Properties of SiC-Reinforced Ti-4.25Al-2V Matrix Composites Produced by Laser Direct Energy Deposition

Numerical and Experimental Characterization of Elastic Properties of a Novel, Highly Homogeneous Interpenetrating Metal Ceramic Composite

Prediction of macroscopic effective elastic modulus of micro-nano-composite ceramic tool materials based on microstructure model

Investigation on A Direct Modeling Strategy for the Effective Elastic Moduli Prediction of Composite Material

Dependences of Mechanical Properties of Ceramics with Bimodal Pore Size Distribution on the Porosity at Various Scale Levels

A Monte Carlo Approach for Simulating Electrical Conductivity in Highly Porous Ceramic Composites: Impact of Internal Structure

The Relationship Between Structural Features and Local Mechanical Properties of a Fine-Grained Matrix in Refractory Ceramic Materials. SiO2 Ceramics Case Study

Prediction of stress–strain response of unidirectional ceramic matrix composites under arbitrary loading and unloading

Finite element modeling of effective thermomechanical properties of Al–B4C metal matrix composites

Numerical Simulation of the Mechanical Properties and Failure of Heterogeneous Elasto-Plastic Materials