Abstract:Random sequence adsorption algorithm, Python and ABAQUS joint simulation, preparation and precise prediction of micro mechanical properties of CF/PLA and SIC/PLA composites containing different volume contents of CF particles and SIC particles. At present, it exists the problems of poor computational accuracy of the micromechanical model and insufficient adaptive matching of the RVE unit cell model boundary conditions, being caused by the random distribution of particle size and quantity in particle composite materials. As for the above problems, the paper proposes a micromechanical model that uses a random sequence adsorption algorithm to deeply match and enhance the random distribution of particles, and a subroutine joint simulation method to generate boundary conditions quickly and automatically. The RVE unit cell model of particulate composites are numerically simulated at the micromechanical level. It was found that the enhancement of the mechanical properties of the base material by enhancing particles is highly consistent with the actual improvement value. The simulation values and actual values of particle composite materials with different volume contents are also accurately consistent. In addition, with the increase of particle volume content, its reinforcement effect on the base material first increases and then decreases, and there exists an optimal mixing ratio and a minimum mixing ratio. The optimal mixing ratio for short cut fiber reinforced particles is 50%, with a minimum mixing ratio of 10%. The optimal mixing ratio for silicon carbide reinforced particles is 40%, with a minimum mixing ratio of 8%. Through experimental results, it has been verified that the micromechanical model can quickly and accurately predict the elastic constants and Poisson's ratio of composite materials under periodic displacement boundary conditions, with a prediction accuracy of within 10%. Highlights Effectively solve the problems such as the random distribution of the size and quantity of reinforced particles in the particle composite material and the difficulty in adding the boundary conditions of the micro‐RVE unit cell model in the macro composite material. A random sequence adsorption algorithm is proposed to generate the RVE cell model with reinforced particles, and the periodic displacement boundary conditions are added to the RVE cell model through Python and Abaqus joint simulation. The simulation results show that the stress of chopped fiber reinforced particles is about 1.96 times that of the matrix material, and the stress of SiC reinforced particles is about 2.1 times that of the matrix material, and the optimal mixing ratio of chopped fiber reinforced particles is 50% and that of silicon carbide reinforced particles is 40%. The proposed micromechanical model can accurately predict the elastic constants of composites under periodic boundary conditions, and its prediction accuracy can be controlled within 10%. In this paper, a more reasonable meso‐stress‐strain field of single cell element is given, which can provide reference for studying the meso‐failure mechanism and nonlinear mechanical behavior of particle composites.

Investigation on A Direct Modeling Strategy for the Effective Elastic Moduli Prediction of Composite Material

Machine Learning and Materials Informatics Approaches for Predicting Transverse Mechanical Properties of Unidirectional CFRP Composites with Microvoids

Elastic Modulus Prediction of Filament Winding Composites Based on Micromechanical Model

Micromechanical Predictions on Elastic Moduli of a Short Fiber Composite with Arbitrary Geometric Combination

Transverse Strength Prediction of Composite Materials Via Micromechanics Model

Iterative Method to Predict Effective Elastic Moduli of Multiphase Particulate Composites

Mesoscopic Prediction on Dynamic Visco-Elastic Performance of Particular Reinforced Composites

Finite Element Analysis of Unidirectional Composite Elastic Constants Predictions Considering Interface

A modified Halpin–Tsai model for predicting the elastic modulus of composite materials

Mesoscopic Investigation On Moduli Prediction In Visco-Elastic Particle Reinforced Composites

Modeling and Characterizations of Mechanical Behaviors of Short Carbon Fiber and Short Glass Fiber Reinforced Polyetherimide Composites

Effective Longitudinal Modulus Predictive Method of Unidirectional Fiber-Epoxy Reinforced Composites Based on FEM

Mechanical behavior and optimization of constitutive prediction model for Epoxy/Al energetic composite materials considering temperature and strain rate effects

Numerical simulation and experimental study on mesomechanics properties of particulate composites

Micromechanical Prediction of Elastic-Plastic Behavior of a Short Fiber or Particle Reinforced Composite

Prediction of the mechanical behavior of fiber-reinforced composite with domain decomposition method

Meso-mechanical assessment of composite materials based on the finite element method

A Comprehensive Evaluation of the Predictive Capabilities of Several Advanced Micromechanics Approaches

A New Two-Step Modeling Strategy for Random Micro-Fiber Reinforced Composites with Consideration of Primary Pores

The Effect of Micromechanics Models on Mechanical Property Predictions for Short Fiber Composites

Microscopic modeling and effective properties evaluation of glass/epoxy plain woven composites